Is anyone here at The Nation fond of waxing/polishing their builds after completion? I'm planning a build that will be painted and then clear-coated, but I haven't much solid information online about what to do afterward. Some places have said automotive rubbing compound, other places said white polishing compound... Anyone here have some advice they'd like to share?

Views: 848

Reply to This

Replies to This Discussion

Scotty

 

If I was going to just spray four to five coats of clear on the guitar regardless of paint type then I let it dry over night and come back and scuff it up the next day.  Then let that sit 30 days.  Why four or five coats?  Because I would be sanding the guitar finish flat with very fine sandpaper and the guitar has to have enough paint on it to not sand down through to bare wood.  If I was not going to wet sand a finish down like this then I would only put two coats of clear paint on the guitar or until it looked good and shiny.  I would apply all four or five coats of clear in up to 1 1/2 hours or so.  You apply one coat of clear and then let it flash/dry just enough before you apply another coat of clear(the clear paint is still wet, but becomes tacky because the thinner has been evaporating out of it).  I'm probably waiting 10 to 15 minutes between painting each clear coat.  I use an old neck to hold the guitar body while painting it and I can touch the clear paint on the old neck to see how tacky it is before painting the next coat of clear on the guitar body.  Painting things too fast results in the paint running.  No sanding between coats was done because all the work I did was in a professional clean spray booth.  Spraying clear coats this way results in the clear building up to a good thickness and all the separate clear coats end up being 'one' because they blend into each other.  You are spraying wet paint on tacky wet paint.            

 

For solid colors a primer is usually applied and that has to allowed to shrink then be sanded flat also before painting on the final color and clear coats.  


Scotty C. said:

By which I mean: do you lightly paint, let dry, clear coat, and wait the requisite 30 days, or paint, wait a month, and then add the clear coat?

Scotty C. said:
Glaze, in this process, in what step does the clear coating/lacquer part figure in?

Nitro with a shellac base is easy, looks slick.  You're supposed to let it cure for a month before buffing, but I rushed, and wet sanded with 1500 as soon as the last coat of lacquer was dry, looked great, mile deep mirror shine.  Shrank into the oak pores, though.  Should have sprayed on two cans for insurance.

 

French polish shrinks a lot less, if at all.  It's laborious, but when you put down the pad after spiriting off the oil from the last glaze coat, you're done, no need to buff or wax.

I know i'm rather low tech lol, but i usually use 5 or 6 coats of hand rubbed Tung oil on my builds (really brings out the natural beauty of the wood)... and this includes the top and the neck.  Then i do at least 3 coats of caranuba wax, buffing each one with a soft cotton baby diaper type cloth in betweeen.  This way, my guitar looks more 'raw', but the wax enables me to wash the grubby fingerprints off it that i'm bound to leave when i play :)  I've never finished the cheesboxes that i use for the body, but i always figured if they've made it this many years without help, then i'm probably alright.

 

HTH,

J

Right.  Keep the neck and body finish in balance or they won't look right together.


Jason Taulbee said:

I know i'm rather low tech lol, but i usually use 5 or 6 coats of hand rubbed Tung oil on my builds (really brings out the natural beauty of the wood)... and this includes the top and the neck.  Then i do at least 3 coats of caranuba wax, buffing each one with a soft cotton baby diaper type cloth in betweeen.  This way, my guitar looks more 'raw', but the wax enables me to wash the grubby fingerprints off it that i'm bound to leave when i play :)  I've never finished the cheesboxes that i use for the body, but i always figured if they've made it this many years without help, then i'm probably alright.

 

HTH,

J

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy yesterday. 5 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Glenn Kaiser commented on Glenn Kaiser's photo
Thumbnail

MAY 2024 Take Down Diddley

"Thanks Doug, will do :) -Glenn"
33 minutes ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Rainbow Stew (low budget cover on cigar box guitar) | Merle Haggard

"A new one for me Kale, and I like it! I always enjoy your CBG covers. Happy Sunday!"
1 hour ago
Doug Thorsvik commented on Glenn Kaiser's photo
Thumbnail

MAY 2024 Take Down Diddley

"Clean and simple! Ready for a little Jailhouse Rock. Go for it Glenn!"
1 hour ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"This one is definitely an attention getter Alan! I’m not brave enough to build one like this.…"
1 hour ago
Doug Thorsvik commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"I like it Andries! "
1 hour ago
Doug Thorsvik commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Me too! It’s a challenge to nail everything right out of the gate, so tweak them when you…"
1 hour ago
Poorness Studios posted a video

Rainbow Stew (low budget cover on cigar box guitar) | Merle Haggard

Happy Sunday folks. I've wanted to cover this 1981 Merle Haggard tune for a while and I decided today is the day. Here's a stripped down cover with nothing b...
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

"Thanks and glad you enjoyed this one Alan! Another Slinger requested song and fun to do. I really…"
1 hour ago
Uncle John commented on Mick Tickner's photo
Thumbnail

cbg1

"Very nice!"
1 hour ago
Uncle John commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Yup.  I get it.  A bit ratty, funky much played and much enjoyed."
1 hour ago
Uncle John commented on Mick Tickner's photo
Thumbnail

cbg3.2

"Very handsome."
2 hours ago
Uncle John commented on Mick Tickner's photo
Thumbnail

cbg4

"I like the look a lot.  My personal experience has been that longer headstocks reduce string…"
2 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->