What's on your workbench?

This could be git related or not. So, what's on your workbench at the moment?

I have 4 scarf joint necks in different stages of work.

A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.

20 members like this

Attachments:

DSCF4036.JPG, 109 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Taffy Evans on August 24, 2023 at 3:59pm

Hey Blues Frog, there could be a "Show Us Ya Wall" segment idea here.

Yours looks well-stocked, do you work your way through playing them? I have to show my other wall now. Ha Ha.
Taff

▶ Reply

Permalink Reply by Blues Frog on August 25, 2023 at 1:31am

Taff,
I do play some of them. I tend to play the six string acoustics and the CBGs on a kinda rotational basis.

I like the "Show Us Ya Wall" idea. Sounds like a good thread to start. Lets see what everybody's got

▶ Reply

Permalink Reply by Taffy Evans on August 26, 2023 at 12:25pm

hi again Blues Frog, Posts on this part of the forum are pretty thin these days, so it possibly would not be supported much. Anyway, here's a photo of my other wall. I go through mine from time to time, mainly the 6 and 12 strings at the moment.

Cheers Taff

▶ Reply

Permalink Reply by Blues Frog on August 28, 2023 at 10:20am

Taff,

I showed my busiest wall as it were which pales in comparison. That's a nice bunch of instruments you have there.

Yeah, the posts aren't like they used to be, other than this one. Still, its a good place for knowledge and to find others who have the obsession with the hobby.
Speaking of which, I just finished a new cigr box amp and am workig on a fuzz box pedal

▶ Reply

Permalink Reply by Carl Floyd on August 29, 2023 at 5:46am

That is a very impressive wall, Taff!

▶ Reply

Permalink Reply by MadGomer on August 29, 2023 at 9:57am

My "wall" is embarrassingly weak compared to those! I end up gifting or donating most of my builds so I'd have to piece together a collage to even get in the game 🤣

.
I'm amazed too at how few posts we get these days, is there some other forum people have migrated to?

▶ Reply

Permalink Reply by Blues Frog on September 4, 2023 at 10:47am

Took a box for a footpedal and made it into a footpedal. Super easy and cheap "Fuzz" pedal.

▶ Reply

Permalink Reply by Taffy Evans on September 4, 2023 at 11:26am

hi, well that's a cost-saving idea. Don't stomp on it too hard. Hahaha.

Taff

▶ Reply

Permalink Reply by Blues Frog on September 4, 2023 at 11:44am

Taff,

It's a surpisingly sturdy box design. The fold over top sits on the body and is very stiff. Of course a seriously hard stomp could cause some damage......

▶ Reply

Permalink Reply by Taffy Evans on September 4, 2023 at 11:59am

It reminded me of two things, one, a recent repair because of all the wires hanging out, and two, using a box, in this instant a case, to build a project.

and

Taff