Hello all! Newbie over here working on my third build which will be my first fretted neck. Super happy with my neck shape and fret board and was just wondering... In y'alls experience, are there any pros and cons to the order of cutting and installing the frets and staining the neck and board?  Intuition tells me to fret first, stain second. Just figured I'd ask to see what y'all have to say on the matter.  Thanks.

Views: 304

Replies to This Discussion

 Well, if I stain and coat first, then I have to clean the slots, and run the risk of scuffing the finish while dressing the frets.

 I personally do all of my fretting and dressing on the raw wood, stain and coat the whole thing, let it harden for several days...then use 800 or better grit directly on the frets and Final Polish the entire board with Magic Eraser, then wet sand with a light kitchen sponge. After that (because I live near the coast and Salt Air is a thing, I lightly clear coat board and frets together...

  Can't wait to see your build!

 When Posting, you might need to switch to the HTML Editor to make it show up-I certainly have to...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

Bernie Edwards commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"The cherries make it really even more special!  Great project with a unique and special result!"
1 hour ago
Crazed Fandango replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
2 hours ago
Crazed Fandango commented on David Woodman 's photo
Thumbnail

IMG_0749

"Amazing!"
2 hours ago
Crazed Fandango liked David Woodman 's photo
2 hours ago
Crazed Fandango posted a photo
2 hours ago
Rich Butters posted a discussion

UK - Best Place to Buy Cigar Box's

Hi all, I am living in Thailand and building CBGs for about a year.  I will be returning to the UK…See More
4 hours ago
Rob (Uker) Porras commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Im assuming the wood is cherry?"
7 hours ago
Rob (Uker) Porras commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Wow wee!!! That is gorgeous!! "
7 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"thanks kale !yup that shaker sure keeps the groove going , and this LACE is my fender in the CBG…"
11 hours ago
AGP # liked Ghostbuttons's photo
12 hours ago
AGP # commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"A while in the making, But!, well worth the wait, another outstanding one off Randy Bretz Build,…"
12 hours ago
AGP # liked Randy S. Bretz's photo
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->