Replies to This Discussion

Permalink Reply by A.D.EKER on June 24, 2018 at 8:04pm

the Comrades

• ▶ Reply

Permalink Reply by A.D.EKER on January 4, 2022 at 12:45am

Hello ! well its now 2022 and i finaly got my Lace pickups in the Mail, in first vieuw a little dissepointment , its not in red but in black (LOGO matchbook ) ,and i was under the inpression that the wireing from the pickup was flat or more flexeble out put from the wires, but the pick -up on the front side appears flat 3mm ,whit adhesive strips 4mm, but the other side it sticks out  1 inch 1/8  ,so drilling in the top cover ,and in many case treu the neck you need to drill a hole for the wire's to go treu the box to the Input Jack.

But now after some wireing info from  BrianQ ,because lace did not include a wireing schema ,only a Qcode but you need a Q scanner, and not everybody does have one(Old School!) .

For those who like some pictures tell a other story for those who are more visualy inclined 

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page