This could be git related or not. So, what's on your workbench at the moment?
I have 4 scarf joint necks in different stages of work.
A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.
Tags:
Nice pair Michael.
When it fails to post, you have to highlight - right click - copy - go to the non post and click edit - right click near the vertical prompt - click paste - then click on add/submit.
Annoying, but after you've posted a couple times it starts working right.
Didn't think of that.
So... I`ve not bothered making any new guitars for a while. Everyone of my friends, relatives have one!
So in my covid lockdown boredom I decided to have a look at old guitars and sort out the niggly little errors I made early on.
I`m currently working on a 3 stringer, under saddle pickup and EQ pre amp. I`ve removed all the frets and added a radius ( something I did on later models) and will also make the box secure with angle brackets to stop unwanted movement.
Pretty easy work to be honest but I have a few more with errors that I can improve on.
Don`t we all ;)
ps, thanks Paul and BrianQ
Hi, this is another way I have always done it if mistakingly posting incorrectly. When I post I have always gone back into the forum and checked that the new post is there. If it is and it is blank I click on the Edit button, which takes me back to the Reply section, but instead of re-editing I swap to HTML and repost. Then delete the incorrect post.
Taff
I got that SG together, but I had a 1/4" space between the strings and the last fret. The neck pocket(bolt on neck) had a degree cut, but they didn't figure it right. The bridge post were all the way down so I couldn't adjust.
I need a neck shim. I was going to cut my own, but didn't have any suitable wood with the right dimensions. I can't use end grain because it'll split all to pieces in thin sheets. So I ordered a pack of shims from Stewmac. They make them from maple and they're not end grain. They are expensive. Set of 3 for 25 bucks, but you get 3 different degree shims(.25/.5/1degree).
I thought it was going to need the 1 degree shim, but it ended up being the .25 shim and having to raise the bridge 1/8" to get it all correct. Also had to adjust the intonation since the process moved the nut a bit further away from the bridge. Funny how a small change can make so much difference. Anyway, this one is done except for some pickup height adjustments. Loving these pickups.
Can we hear it, can we hear it?
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 15 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER on Wednesday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!