So, payday has hit, so it's time for me to stop gabbin' and start building. 

I will be going out for supplies later, and I was looking online to check out some tool ideas, and I found this...

http://www.harborfreight.com/4-inch-mighty-mite-table-saw-93211.html

I live in an apartment, so I can't really have a full table saw, so I was hoping this could work for some things, such as trimming up a fret board from a 1/4" thick board.

Since many of you here have vastly more experience than I with woodworking, I thought it would be a good idea to get you opinions.  

I am not under the impression that this will be anywhere near as powerful as a normal table saw.  I am just hoping that. with my limited space, and the smaller lumber used in CBG, that this could be a decent option for me.

Thoughts?

Views: 1933

Reply to This

Replies to This Discussion

John, I am going to quit giggling at this point and say I get it. I know exactly what you are saying. Without getting shrouded in term like "spirit of the wood" and other zenlike references, there is an intimate connection to be made with whatever material you are working with.

I had the fantastic opportunity to work 3 years under a master woodworker who had built a reputation as a door and chair maker. Yes, the center of the shop floor was the home of a table saw that appeared to have been built by NASA, but the shelves and drawers were filled with all manners of planes, boring apparatus, chisels, and handsaws. Some were decades old, and all well used and cared for. More significant is that none of them were new.

As we worked, things were said like "I guess this piece doesn't want to be a chair leg.", or "These two won't get along well." It may sound silly to some, but the fact is that a piece of wood is not a piece of wood. If you don't want to grow your hair out, eat bean sprouts for lunch, and begin speaking to your wood, that is great. However, there are things that really shouldn't be ignored.

Wood is cut year around, and from a wide geographic area. Red oak cut during the fall in Northern Michigan is much different than the same species cut during a North Carolina summer. Was it a dead fall? How long was it dead? Limb wood or trunk wood? Kiln dried? Air dried? You go to the supplier and it simply says "Red Oak"

I can hear the keyboards chattering now, so I will put in my disclaimer. NO I cannot sniff a piece of wood and tell you how many kids the guy that cut it had in public school in Ohio. I am just saying there are different characteristics that, while they can be ignored, offer rewards if they are not.

As far as what apparently came across as an attack on the word "Newbie", maybe saying I hate it was too strong. There seems to be an outpouring of support for the term. Support so vigorous that the meaning of the OP may have been lost. I was simply trying to convey the feeling of welcome I had when I first joined this site. I never felt like a "noob", but like a fellow lover of CBGs. Yes, the advice I have received has sometimes been convoluted, self-promoting, and even slightly condescending. More often than not, it has been freely given, extremely helpful, and reflective of the advisors deep knowledge and experience. If I got on some toes, that wasn't my intention. Just a poor choice of words I suppose.

I think the bottom line is that there are many ways to skin a cat. I have made things entirely by hand and will probably do so again. I see power tools as a convenience, not a need. As well I can be more precise when I use them. Can I rip down a board by hand? Sure. Would I rather run it through a table saw and know the cut is true? Yes. I've shaped a bunch of necks with a hand rasp (I don't even have a draw knife), but running my trim router over them with a 1/2" roundover bit saves me a lot of time. Also since my day job is being a computer nerd I have a bit of carpal tunnel so I find any way to avoid repetative stress that I can.

I think my guits have some pretty good mojo, regardless of whether I've used power tools or not. I was joking around when I posted about riding a horse instead of a car. I very much appreciate non-machine hand-crafted items. But if I carve a rod piezo bridge using a dremel I still consider it hand-made.

Going to pick up a 9" Ryobi band saw tomorrow. Getting it for $65 on Craigslist.

Good thing, too. I just ruined my first attempt at a scarf cut with the back saw.
Make sure it has a fence and a mitre slide. I picked up an old Black & Decker band saw. It works well for what it is, but ....

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
3 hours ago
BrianQ. liked Dar Stellabotta's video
3 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
5 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
7 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
7 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
9 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
9 hours ago
A.D.EKER commented on Ricky D's photo
9 hours ago
A.D.EKER commented on A.D.EKER's video
9 hours ago
Keith Rearick liked Doug Thorsvik's video
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->