Comments

• 

  Dave Lynas June 4, 2013 at 6:36am

  Hi Mort. I've had her out for a test drive for two gigs now. She worked great acoustic down at Sandstone Friday and electric at Monday music. She has a nice low twang and plays easy. I'm liking playing a 3 string again. And i've never played a 3 string using the heavy strings. I usually used a 10, 13, 17 on my strumsticks. The lower tones worked nice with the group who have fiddles, banjo and mandolins. Thanks Mort for the direction. .. Dave
• 

  Dave Lynas June 2, 2013 at 8:20pm

  Well Mort, it was fun building and i do like how she came out. I think i'll lower the action for better finger picking and show it at the Sandstone show. You are right that it's worth more than 125. I was simply honoring my word at being cheaper than 150. It got more expensive than i started off to make. The parts just add up. As it stands it's got about 100 in parts even though i got the parts at very low prices. Anyhow, all's well. I'll keep at it and maybe you'll soften for one down the line. Jamin would be fun. Maybe at the Red Mug some Monday soon? .... Dave
• 

  Dave Lynas May 27, 2013 at 8:07pm

  Hey Mort, she's almost done. Just some adjustments and tweeks. Sounds very good. One of my best. I think you'll like her. Pictures posted this morning. I'll keep her for a week of test runs and final varnish etc. Then you can come fetch her. 125 would be ok. As i said cheaper. If too much that's fine as i have a show coming in July at Sandstone Old School Art Center of my builds and pots. This one would look great in the show. .... Dave
• 

  Dave Lynas May 23, 2013 at 9:32pm

  More progress Mort. Controls added today and the interior bracing is done. Photo's on todays pictures. .... Dave
• 

  Dave Lynas May 23, 2013 at 7:09am

  Thanks Mort. Glad you're liking it. You wanted a lower priced model. I'll keep it low as that was our deal. You'll wind up with a nice axe for less. I'm doing it to get something out there. Perhaps you'll show it off on Nation if you like it.
• 

  Dave Lynas May 22, 2013 at 12:46pm

  Hey Mort. Just posted latest photos of your git. Top is cut and pup added. Control plate is done except for the pot holes and jack hole. Now you can see how she'll look.
• 

  Dave Lynas May 21, 2013 at 7:18am

  Mort, thanks for the details. I think i've got it.... 5th, 4th and 3rd string GDG. Highish action but fretting still possible. I like it.... I'm on it..... you'll get it.... D ... still could use your input on string spacing (the space between the strings). 1/2 inch will use the fretboard width to good effect. However you may prefer a 3/8 inch. Let me know if you can. ...
• 

  Dave Lynas May 20, 2013 at 11:11pm

  Hey Mort, i'm closing in on your build. I could use some more information. What string spacing do you like? Will you play it finger picking or slide or both? What strings do you use? Thick ones like the 46, 36, 17? or the thinner ones like 10, 13, 17? How do you like your action? Low for fast finger pickin or high so you don't whack the frets with a slide? Do you use a strap or play on your knee? I got the top cut out with one sound hole in her so far. Access panel tomorrow morning. Varnishing continues. 3rd coat.
• 

  Dave Lynas May 19, 2013 at 6:50pm

  Hey Mort. There's more progress on your build. Pictures posted a few minutes ago. You can find all of the photos in my Squirrelworks album. ... Dave
• 

  Dave Lynas May 11, 2013 at 8:06pm

  Sorry Mort, can't leave a message for some unknown reason. I try, but it just sits there and never sends. So, i just copy and paste it into your comment wall and it gets done. Just not private. .... wish i could fix it, but i don't know how. I cant add photos or vids to a comment either. Just a glitch in my system i guess. By for now.....