I've been using a triangle file to create slots in my nuts for my strings, but I'd like to be able to do proper nut slots at some point.

However, I'm not quite ready to drop ~$100 for a set of StewMac nut slot files.

I've seen some cheapo "nut files" that are apparently really fuel-jet cleaning files; do those work? Are they reasonable substitutes for proper nut slot files for guitar work? Is this overkill for CBGs?

Views: 154

Reply to This

Replies to This Discussion

What about these:

https://www.cbgitty.com/tools-templates/cigar-box-guitar-nut-and-br...

I have a very similar set that seems to work just fine.

I have feel gauges that I used a Dremel cutting wheel to cut small notches spaced very close to each other, thus making various slotting files for many string gauges. check this video out:

https://www.youtube.com/watch?v=CslelQBTwP0

You are so right about the fuel-jet files. They can be purchased at any welding supply shop. <$20

harbor freight also has the fuel jet files. I use them as well

What section of harbor freight & how much were they? I've asked in two stores and either they didn't know or these stores didn't carry them. I personally looked in the welding, no luck.

Many of us, me included, use the torch tip cleaners from Home Depot. They are in the welding tool section by the power and hand tools. Made by Lincoln Electric and around $5. 

Torch Tip Cleaners - Home Depot

They work great for shallow slots. But for cutting deeper slots or making a lot of cuts for doing multiple nuts (if you are doing a batch)  they can be tedious to use, so I snip them out of the metal casing and use a jeweler saw to hold them for improved stability and easier on your hands. I use a cheap jeweler (frame) saw similar to this:

Small frame jeweler saw - Ebay

Well aren't you the smart one! LOL Damn good idea using a jewlers saw, something else i gotta buy.

I’ve seen those in Home Depot, they’re pretty much same as the cb gitty one, but half the price $3.97?  You’ll eventually need this tool anyway if you make your own nuts/bridges? And, no it’s not too much to file nut slots on a cbg? if you care enough to put quality in your instruments, then it’s only natural to go the extra mile.good luck to ya’ :)

I've used the tip cleaners before and they work, just takes time.

Stewmac sells 4 string uke nuts that are already slotted and they work great, but I just use a brass or steel bolt for a nut nowadays. Just file a half round slot for the bolt deep enough for proper string height and the grooves are already done. ;)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
1 hour ago
BrianQ. liked Dar Stellabotta's video
1 hour ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
4 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
4 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
5 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
5 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
7 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
7 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
8 hours ago
A.D.EKER commented on Ricky D's photo
8 hours ago
A.D.EKER commented on A.D.EKER's video
8 hours ago
Keith Rearick liked Doug Thorsvik's video
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->