Replies to This Discussion

Permalink Reply by Korrigan on May 8, 2018 at 3:24pm

Chickenbone John is the guy to ask about that.  : )

https://www.youtube.com/watch?v=KTvZU4o7zFI

• ▶ Reply

Permalink Reply by Korrigan on May 9, 2018 at 1:34am

No problem Richard. I saw this video ages ago, when I first started researching CBG building, I'm surprised i remembered it.

That was way back in September 2018... I guess the Alzheimer's hasn't fully kicked in yet. lol

• ▶ Reply

Permalink Reply by Kigar on May 9, 2018 at 2:39pm

Wow Korrigan, I always thought you were a futuristic guy.  Can you send us some lotto numbers?  Actually thanks for the link, whenever it came from!

• ▶ Reply

Permalink Reply by Korrigan on May 9, 2018 at 3:11pm

Lol Kigar, good catch. Yeah, no Alzheimer's yet, just a touch of dementia.  :D

• ▶ Reply

Permalink Reply by Taffy Evans on May 8, 2018 at 6:16pm

Hi Tom, now that you mentioned it, I remember doing this on a three string some time ago. I set it up and forgot about it and then sold it without having the chance to use it.

l'll leave you to work out the details, but I remember it was a through neck and was bolted at the heal and another bolt at the tail end was used to do the tilting. I must have used what I had in the "save for later" drawer for tail end mechanism.

cheers Taff

• ▶ Reply

Permalink Reply by Taffy Evans on May 9, 2018 at 11:12am

Hi again, I had just remembered my principal for the adjusting mechanism. I had not seen the video last time I was on here, but the systems are similar.

To show the workings I have pictured a jig I use for setting up, a double bass, for clarity  in this instance as it is bigger than the violin and cello versions. the violin jig shows how small the unit can be.

A set up like this was mounted at the end of the neck, in the neck stick is a threaded insert, it runs up and down the threaded rod tilting the neck. the tail end of the neck was not "free floating" as it is always attached to the threaded rod. Food for thought?

Cheers Taff

• ▶ Reply

Permalink Reply by Tom Gilreath on May 14, 2018 at 1:49am

Thanks for the info, people. I think I've got it figured out. We will see how it goes!

• ▶ Reply