First build and first post so bear with me as I’ll probably have  few questions along the way. I’m using a CBGitty box, burnt laser markings are on the outside on purpose. I’ve wood burned the top and I’m going to distress it so I figured the burned marks will help. 

Now to my question. I’ve ordered a premade fretboard and I plan on using some old heart pine as the neck. I’m wanting the fretboard to come over the top of the box a little but not sure how the process needs to go. What would be the best way to go about this?

My thinking is to fix the neck so it’s flush with the top then glue the fretboard on. With this box, the top sits on top of the box, which I’ll screw on blocks I’ll put in the corners so he neck will have to be notched so it comes up even with the top with lid on. 

Thanks for any advise. 

Troy

Views: 1077

Attachments:

Reply to This

Replies to This Discussion

Many "fretboards over box"  guitars you see  actually have that part of the lid cut out around the end of the fretboard .(usually extending from the notch  for the neck.  ie:


This way you can still manage to open the box , for repairs / add ons etc ...

just a popular option. hope that helps . 

Wish I had an actual picture to show you but here's a drawing.  What I do is make the neck almost flush with the top so that when the fretboard is affixed to the neck it will end up floating about 0.5mm above the top of the box. Doing that creates a slot between the neck and fretboard for the box top to slip into.

Hey AP, I think we use the same CAD software. :D

MS paint ?  lol. 

Yes sir, only the most cutting edge software for us!

Yep, that’s what I’m looking to do, floating neck.
Would it be better to size the neck, fit it to the box then add the freatboard?

I do it like Korrigan's picture. Notch the neck and dry fit to make sure the fretboard clears the box, remove the neck and glue down the fretboard, then install the whole thing as one piece. Gives me a chance to make one final shaping pass on the neck and fretboard to get everything as fair and smooth as possible.

Yes, do all your measuring, cutting and dry fitting before you glue the fretboard to the neck.

Thanks for the suggestions. Here’s what I come up with and I think it’ll work ok. The top will be screwed in at the corners. After the fact, I think I should have notched the bottom of the neck instead of cutting the box to the full thickness of the neck. It’s a snug fit so it’ll look ok.

Attachments:

Looks great as it is Troy. Notching the bottom of the neck would have weakened it considerably.

Lookin' good!

Here's a link to how I make my standard ready-made guitar necks, where the end of the fretboard projects over the top of the box.  It is not at all complicated. https://youtu.be/ohXauQXIrjw?t=1m32s

Thanks for all the kind words and information. Getting a little closer. Got fret markers in and trying to age the box a little, not quite finished but getting close to the look I was after.

Attachments:

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->