I'm currently working on 4 "paddle box" style guitars/strummers/whatever. I'm at the stage of shaping the tops and trying to decide on sound hole size and design. I've looked online at a lot of technical discussions on Helmholtz resonation and such, all of which is way over my head. I'm looking for a simple formula to get a general idea of calculating sound hole size to box capacity (if there is such a thing).
The second part of this concerns soundhole shape and whether that affects sound. Most flat-top guitars have round holes. Arch-top and bowed instruments (violins, cellos, etc) favor f-holes, and then there are luthiers that get creative and carve very elaborate designs. Is it just personal preference? Obviously round holes are easiest to make, but I'm trying to take my builds to the next level in terms of both workmanship and performance.
Any input is greatly appreciated!
Tags:
I did the math, and I've attached a quick and dirty version of the Helmholtz equation in word format, with an example for a "typical" CBJ. Hope this helps, or at least provides a starting point.
If you have more than one sound hole should they all be this size or add up to this size? For the box volume, should you subtract the losses from the bracing and neck mountings?
In earlier post I was looking at sound hole size and found these 2 formulas.
I set up a spread sheet and ran both formulas listed below using these numbers
Dimensions 10 x 8 x 2
Frequency of 2nd lowest string 146.83
Formula for calculating sound hole diameter returned a sound hole diameter of 1.684
Helmholtz equation for sound hole diameter for cigar box guitars returned a sound hole diameter of .824
One of these numbers is about half of the other. Am I calculating something wrong or am I completely missing something here. Could the Helmholtz equation be the radius instead of diameter. Any clarification or help would be welcome.
Formula for calculating sound hole diameter
1.) Calculate box volume(V) = Length * Width * Height
2.) Solve for the radius of a sphere of the same volume: radius = ((3*V)/4*pie)^(1/3)
3.) Divide the radius by 4.
4.) This resulting value is the new radius of the sound hole.
5.) So, 2 x radius is the new sound hole diameter.
And came up with this example: (2 * (((3 * 8.25 * 5.5 * 2.75) / (4 * 3.14))^(1 / 3))) / 4 = 1.55023303
Another post gave this formula:
Helmholtz equation for sound hole diameter for cigar box guitars
The equation is:
Sound Hole Diameter in inches = F2 x W x L x D x 0.00000023895
where:
W = box inside width
L = box inside length
D = box inside depth
F = frequency of 2nd lowest string in Hz
For example:
The D string on a 4 string CBJ tuned to open G (GDGB) is 146.83 Hz
The inside dimensions of the cigar box are 8 x 10 x 2 inches
Substituting these values into the equation, we have:
Sound hole diameter = 146.83 x 146.83 x 8 x 10 x 2 x 0.00000023895
Sound hole diameter = .824 inches, or about 53/64”
Hal,
Yeah, I have a couple science degrees, so this kind of stuff is like breathing to me. I have a Martin Backpacker that has a relatively large soundhole, too, for its size. Yep, these tend to have bright highs. Reason I advocated a smaller soundhole is that many CBG builders seem to want to boost the lower bass frequencies, which many feel gives a "warmer" growlier sound that they associate with the Blues. The bright highs tend to sound tinny to my ears (which are undoubtedly damaged from years of exposure to high-decibel concert rock), and also make such a CBG sound "banjoey." That said, the reason I bought the Backpacker is because I needed a mandolin-like sound for a stage show I was doing years ago, and it was a far cheaper alternative than a real mando. Plus, it was my first "portable" travel guitar.
I'd use the Helmholtz resonance equation only as a rough guide to soundhole size, not as a specific remedy, because all it will tell you is the "optimum" frequency at which your soundboard will resonate best for a given volume of air (read box size). Brings up a question though: if you're gonna build several of these box designs, why not try at least one with a smaller soundhole? If you're not happy with it, you could always increase the soundhole size until you get what you like. If you go back and look at Rand Moore's original paddle box, and at similar Russian balalaika, and Chinese, Japanese, and some Indonesian 3-stringed instruments I've seen recently, whose names I can't properly pronounce, they all appear to have quarter-to-silver-dollar-sized sound holes. I've played several balalaikas and related instruments, and they always sound mellower and lower toned than my Backpacker with the smaller volume and larger soundhole. It might be worth a try, especially if you're gonna amplify them with a piezo or mag pup. That said, I also have a couple of Middle Eastern ouds, and the one with the larger and more numerous soundholes (3 in the case of my cheapo Iraqi oud, a large circular soundhole in the center, about the same size as a dreadnought acoustic soundhole, but covered in highly detailed "fretwork," and one smaller oval one either side of that, lower down, from which I removed the fretwork to increase projection) also sounds "tinnier" and focused toward the higher frequencies. I suppose this is to cut through the conversation at parties and coffee shops.
Hi Oily & Hal.
On my first paddle box stick dulcimer (the one documented in my discussion group "Home Made Resonator Boxes 101, v.2.0"), I decided to position the sound hole in the same relative location as Bob McNally does on his standard strumstick (mine I use as a kind of reference model). His instrument is a bit too high pitched for my taste, so I decided to build my sound box bigger (roughly 4 times bigger) and I put guitar strings 2, 3 & 4 on it to achieve a bass-ier sound. The size of my sound hole is 2 cm (7/8"), the same as McNally's strumstick. At the time, I thought I could always make the hole larger if needed, but I have never felt the need.
My second paddle box project (still in progress) is sized about halfway between the McNally Strumstick and my first paddle box. It has a 2.5 cm (1") diameter sound hole positioned in about the same relative position as the other two instruments. So, soon I'll see if a bigger hole makes much of a difference or not. Incidentally, this new paddle box will the a 4-stringer. The first 3 strings will be identical to a strum stick (will probably use banjo strings), and the 4th string is 3/4 length like the dulcijo, and will be the same diameter as string 1. So, essentially a 4-string dulcijo. Should be finished in a week or so. Still need to stain and finish the instrument, add the frets and finish stringing it up.
As far as the theories and formulas regarding optimal sound hole size, I just find the hole topic "over my head" and prefer winging it. On several of my instruments I started with small holes and on occasion widened them with fair improvement in volume. I also subscribe to the idea that if you hold your sound hole up to your cheek and tap on the back, you should feel a puff of air. If your hole is too big, you won't feel the puff. Not scientific, but better than no rules at all.
-Rand.
Been waitin' for ya to join the discsussion, buddy!
You touch on some of the same themes I was discussing with Hal: Small sound hole, relatively big box (more air volume), and thicker strings. I think your "puff" test is perfectly valid and scientific, at least in the sense that it is a repeatable test easily done by other "investigators," and I think could be supported by the mathematics. If we wanted to get all engineering technical (which might be fun, but not, certainly, what Hal, you, or even me, really wants to do), we'd have to hook up some pressure measurement device to the sound hole to measure the pressure of that puff (a dB meter might do it), and then investigate the same test with 1) same volume box, but different soundhole sizes (my soundhole template idea), 2) single soundhole template, but different volume boxes, and finally, 3) different volume boxes with different sized soundholes.
Then we'd have some data to cuss and discuss 'til the wee hours, while the glue is drying.
OK, here's a thought for the group: What sizes (LxWxH) do the majority of cigar boxes come in? I can make up an Excel table with that data, then take various soundhole diameters, and run scenarios using the Helmholtz equation. Will tell us the optimum resonance freq. Put it in musical terms: "This configuration resonates best at A2, so use strings 2,3 and 4 for a bassier-sounding git, or 3,4 and 5 for a brighter tone," or whatever.
Heck, I don't need most cigar box dimensions; I can just build a data matrix for all sizes, starting with a 1"x1"x1" cube (given a 1" wide by 1" deep neck, a git virtually no one would attempt to build), and soundhole sizes from 1/32" to, say, 8" (yet another set of likely-to-be-unplayable boxes), assume soundboard thicknesses of 1mm to 1/4," and see what freqs pop out! Then we could apply known string gauges to this data, and see what an "optimized" CBG might theoretically look like. Then, we use the idea of crowdsourcing by going through the thousands of build pics on the site, get dimensions of boxes, string gauges and soundholes, and I betcha we'd find that the monkeys have not only already written Hamlet, but have secured the movie and product distribution rights to it, as well!
But then, we could reasonably claim we'd know: "For a Padron box with dimensions X,Y,Z and a lid thickness of h, using string gauges l,m and n, the preferred soundhole size(s) for best volume and frequency response are..."
Back to y'all in a couple days with the Excel table. Anyone out there interested in some finite element analysis?
Yeah, me, too.
Oily
Hi Oily,
Sounds like you are a glutton for punishment (what advanced math seems to me). If you like to crunch all that data, go right ahead. Let us know if you find and trends and/or practical "rules of thumb" you can gleam from all this data analysis. Then maybe we can test the theoretical against builds we have actually done. Well, good luck.
-Rand.
Oily (the masochist) & Rand:
Like the Pirate who walks into a bar with a steering wheel stuck in his pants said,"Arrrrrgh.....It's drivin' me nuts!"
I've calculated that the interior volume of my paddle boxes will be approx 2/3 that of my travel guitar (which, BTW, I also can't play). That would put my soundhole at about a 2" diameter, which may give me better projection, if bigger is better, with the added depth of the box making up for some of the bass loss.
I also realize that string selection will be very important. I've had good luck with using .011, .016, .022' and .030" gauges so far tuned to DGBE with a scale length of 25.5". Again, theses sizes tend to be brighter and will be even more so with a shorter scale (I'm planning on roughly 23" for these), so I may try larger sizes for a warmer tone.
I find it fascinating just how many variables come into play. I wish I could understand them all.
Started by Habanera Hal. Last reply by Rich Butters Nov 6, 2019. 24 Replies 2 Likes
Started by Jeff Box. Last reply by Thomas Case Sep 4, 2019. 3 Replies 3 Likes
Started by Jeff Box. Last reply by Jeff Box Sep 9, 2017. 5 Replies 0 Likes
Started by Fomhorach. Last reply by Mike Jun 17, 2017. 4 Replies 0 Likes
Started by John Hopper. Last reply by Moritz Voegeli Feb 23, 2017. 1 Reply 0 Likes
Started by Fomhorach. Last reply by Fomhorach Jun 16, 2016. 7 Replies 0 Likes
Started by Darren Addy. Last reply by Ron "Oily" Sprague Jun 14, 2016. 7 Replies 1 Like
Started by Habanera Hal. Last reply by Fomhorach May 4, 2016. 12 Replies 2 Likes
Started by Mario Poggio. Last reply by Philip Hale May 4, 2016. 9 Replies 1 Like
Started by Chuck Dubman. Last reply by G.S. Monroe Dec 21, 2015. 17 Replies 0 Likes
Started by Brian Lemin. Last reply by Monterey Mar 20, 2015. 8 Replies 0 Likes
Started by Scott W. Last reply by Scott W Jul 17, 2014. 9 Replies 2 Likes
Started by Lee Martin. Last reply by Wichita Sam Apr 3, 2014. 4 Replies 0 Likes
Started by Tim Mac. Last reply by Better Trees Jan 15, 2014. 3 Replies 0 Likes
Started by Keith Weser. Last reply by Mario Poggio Nov 29, 2013. 9 Replies 0 Likes
Started by Jillian Holladay. Last reply by Jillian Holladay Jul 23, 2013. 12 Replies 2 Likes
Started by Wayne Bigler. Last reply by Wayne Bigler Jul 12, 2013. 5 Replies 0 Likes
Started by Roadkill a.k.a. John Maw. Last reply by Mark Bliss Jul 10, 2013. 163 Replies 1 Like
Started by MichaelS Country Boy Guitars. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 19 Replies 0 Likes
Started by Sam Fontenot. Last reply by StarrCBGs(Donovan) Jul 10, 2013. 17 Replies 0 Likes
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
Posted by billy jones bluez on February 8, 2024 at 4:05pm 0 Comments 0 Likes
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!