Replies to This Discussion

Permalink Reply by mark "mudcat" quigley on July 5, 2011 at 10:49am

any pics

Ian david campbell said:

Oily

 

that sounds brilliant

any photos

• ▶ Reply

Permalink Reply by KaptnKen on July 5, 2011 at 11:18am

I've been using pieces of old 1/2" copper pipe that I have laying around. I'll measure out the length I need, cut it off, then saw the tube lengthwise. With a couple of screwdrivers I worry the gap open enough to be able to get some pliers in it to open it up even more then take mighty hammer to it on the anvil to make it flat. After that It's to the vise and more work with Mr. Hammer until it looks like what I have in mind. Then clean the edges with a file, drill holes as needed and there ya go!

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on July 6, 2011 at 2:15am

Ian,

 

I'll post some this weekend when I have time, along with build status pics. I got it "right" on my third try (the curled fork tines). The others look rougher and homemade. Which they are.:-)

Ian david campbell said:

Oily

 

that sounds brilliant

any photos

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on July 8, 2011 at 6:39am

Gents,

There are now pics of Alamo Guitars(tm) "Gellerized -Just Bend Over!(r) - Tailpieces" on my CBN page. Look for the photo album called "Oily's Guitar Lounge." Build pics to date are also there.

Thanks to Rafal Sulejman for helping me name my tailpieces. Come join the Uri Nation! Heheheheheheheh...

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page