Replies to This Discussion

Permalink Reply by Carl Floyd on April 26, 2022 at 2:18pm

• ▶ Reply

Permalink Reply by MadGomer on April 26, 2022 at 2:29pm

Great work Taff (as always). Looks like you reworked the finish to get away from the sunburst, or was that just the lighting in the picture faking me out? Curious how you went about that.

• ▶ Reply

Permalink Reply by ILL GREEN on April 26, 2022 at 9:04pm

Saw this at MGB, 

• ▶ Reply

Permalink Reply by Paul Craig on May 1, 2022 at 9:02am

Nice, I was wondering when someone would get around to making one of these.
I did get a Jr style wrap around bridge for 4 string gits from MGB.

• ▶ Reply

Permalink Reply by ILL GREEN on April 26, 2022 at 9:16pm

I saw that tremolo at MGB. They also have a 3 string version. $27.00 USD for the 3 string and $29.00 for the 4 string.  Already ordered one, will report back.

• ▶ Reply

Permalink Reply by MadGomer on April 27, 2022 at 1:42am

$27 seems like a great price. Currently in the process of installing a 4 string hardtail I got from Gitty awhile back. Hope to have pictures soon.

• ▶ Reply

Permalink Reply by BrianQ. on April 27, 2022 at 5:56am

Yea, I thought that was interesting too. I also ordered one for a 3 stringer, hopefully I’ll get to it before summer? https://mgbguitars.com/collections/bridges/products/mgb-pitch-bende...

• ▶ Reply

Permalink Reply by Infirmity Citrus President on April 27, 2022 at 12:46pm

finishing up my solar generator. 600 watt panel array, 24 V 100AH battery, 2500 watt inverter. I am at the stage where I realize I need to add just one more feature - keeping the post office busy. operational by memorial day.

just made a major breakthrough on a stalled project: building an alarm to let me know when someone starts driving down the 400 foot driveway. I finally got the ESP32 to take a program.

rebuilding the brakes on the baja bug. then I install the 2165 ( 94 X 78 ) engine.

two CGBs in the acquiring parts stage: Two Padron 5000 boxes, one neck kit, one each humbucker, single coil and piezo pickup, so far.

reviving a Hilgen Basso Profundo 2502. replace the two conductor AC cord with a grounded plug, ditch the death cap, replace the power caps and install an Eminence Legend 15" 8 ohm.

the trick to being retired: have half a dozen projects going. always have parts for all of them in the mail. always have parts waiting to be installed for both indoor and outdoor projects.if you have projects that are nearing completion, have another in the acquiring parts stage and another in the just learning about it stage. always have something to do, and an excuse for not being done.

• ▶ Reply

Permalink Reply by Taffy Evans on April 27, 2022 at 2:35pm

Hi Madgommer, the finish on the PRS is stock, it must be the light playing tricks.
Taff

• ▶ Reply

Permalink Reply by Carl Floyd on April 28, 2022 at 3:44am

My post yesterday got lost in the ozone because I forgot to hit the darn HTML Editor tab. 

Great job rescuing that guitar, Taff!  That was added because the 22 fret SE Custom was not offered with a Floyd Rose.  PRS did do a Floyd Rose model on the SE Custom 24.

The SE came about many years ago as a request from Carlos Santana to his friend Paul Reed Smith to develop an affordable Student Edition PRS.  They are made overseas.  I used to have a SE Singlecut (pre-lawsuit).  It was a good guitar.  Of course, it didn't hold a candle to my any of my USA PRSi.

Glad to see that one get a new lease on life!

• ▶ Reply

Permalink Reply by Taffy Evans on April 28, 2022 at 11:52am

Hi carl, thanks for that, I did not know all that info. Yes, it looked so clean it was a shame to let it sit there with the other guitars when someone can use it. But it took a lot of work over three days, but the look on the young lady's face made it all worthwhile.
Cheers Taff

• ▶ Reply

Permalink Reply by Keith Zorn on May 24, 2022 at 8:34am

Attachments:

• CBG#13.jpg, 546 KB

• ▶ Reply

• ‹ Previous
• 1
• …
• 177
• 178
• 179
• 180
• 181
• …
• 187
• Next ›
• Page