It depends on tools you have available as to best method. I run a full board of 3/4 through a desktop plainer to get my 5/8 and cut that into a bunch of head stock. However, you can go ahead and cut your scarf and take your down your head stock piece down by sanding or whatever means available to you. I find it much easier to reduce thickness when they are separate and it looks cleaner. Plenty of Youtube vids on scarf jigs.
I glue the joint then measure 5/8 (or 1/8 from the top) and make the cut with a band saw. Then clean the top of the cut with a file and sandpaper. You really can just rasp the 1/8 off. Be sure to take it off the top so the tuners have the flat surface to mount.
Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12, 2022. 9 Replies 0 Likes
Started by Danny B.. Last reply by Fantacone Box Works Mar 12, 2022. 7 Replies 0 Likes
Started by PattJ. Last reply by Fantacone Box Works Mar 12, 2022. 2 Replies 2 Likes
Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11, 2022. 4 Replies 0 Likes
Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies 2 Likes
Started by music2me. Last reply by music2me Nov 18, 2017. 4 Replies 0 Likes
Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies 0 Likes
Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies 0 Likes
Started by Danny B.. Last reply by Danny B. Nov 13, 2016. 6 Replies 0 Likes
Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies 0 Likes
Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies 0 Likes
Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies 0 Likes
Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies 0 Likes
Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies 0 Likes
Started by Paul Cooper. Last reply by Paul Craig Sep 15, 2015. 22 Replies 1 Like
Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 19, 2015. 21 Replies 0 Likes
Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies 0 Likes
Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!