BrianQ,

Thanx for the info!

Eddie

Brian, I looked through your photos for an example where you used molding for a fretboard, but couldn’t find one. I did note the use of toothpick frets, good on you! Doug

Thank you Brian. I just picked up a few cigar boxes in the Beale St. Blues district in Memphis TN. They weren't aware of any cigarbox guitar festivals in or around Beale St. Do you know of any in the Memphis, TN area?

Thanks for your welcome Brian, and the guise to the  inks. Very much looking forward to becoming involved. All the best  Chris

OK thanks Brian

Thank you for the info Brian, on my third build now! I’ll be sure to get more involved in the forums and posts. I’m from NH where you at?

thank's Brian,

i was guessing about 3/16" looking at pic's of dulcimer's, but if 1/8" work's that will do fine,

yes, i have'nt posted for a while, life just get's in the way,

Thanks for having me

Thanks for the welcome, Brian!

Thank you!

I had some extra material on my  neck, I was going to cut it off, but thought I could do something ornate with it, I'm going  to make a peg wall hanger for It, and try a strap with it also. Thanks for taking an interest in it. Its my first fretted instrument, I learned a lot along the way,

Thanks, it has 2 springs in it for reverb and it sounds just like a banjo

Thank you Sir BrianQ

thanks much, glad to be here. site has amazing amount of content and very active/up to date. I plan on spending a fair bit of time just learning what's available.

Thanks BrianQ!

Thanks for letting me know.

Thank you. tHERE BE ALOT GOIN ON HERE!

thanks

Thank you for your comment, looking forward to being part of a community that I share the same interest in