Replies to This Discussion

Permalink Reply by BrianQ. on November 18, 2021 at 9:26am

License plates have Aluminum in them, which is not magnetic, but will carry electrical current. If your pickup is rated at 2K or higher, then you have nothing to worry about, most pickup covers are plated Aluminium these days , so it’s all good?

• ▶ Reply

Permalink Reply by Priit Tamm on November 22, 2021 at 12:14am

I had experience with ghost pickup and licence plate. If it is newer plate (made from aluminium etc.), just glue or tape it under plate, should work good, no problem. But I tried older steel licence plate, where pickup sticks under the plate with its magnet. All good, but in this way the problem is that whole steel plate act as huge pickup beacuse of pickup magnet and there are terrible feedback noises, specially if more gain is used of if you stand close to amp. Can't use ghost pickups in steel licence plate builds.

• ▶ Reply