I was wondering how most of you square up the neck coming out of the box?  Im working on a padron box thats a little un square. I have the front neck slot cut out of the top and its centered. Its not a thru neck. 

Views: 669

Reply to This

Replies to This Discussion

  • Happened to me, too just now. Not about to type it again on my phone!!

Actually, you’re right on track with your method, adapting is a major part of building, it’s what defines us. Cigar boxes are commonly crooked, so lots of times we have to find center & true everything off of that. But if everything in a build was perfect, this would get boring quick? Good luck with this one :) is this your 1st attempt at a bolt on neck?

I mostly build ukuleles where there’s a bridge or block that the strings tie to. Regardless of how square the neck is with the front of the box, that bridge or block has to be glued to the box in the right location so that the outermost strings are spaced equally from the edge of the fingerboard. I usually attach the neck and clamp the nut in place. Then I run a loop of fishing line over the nut and through the outer holes in the block. I can then find the correct location for the block by moving it around until the strings align with the neck properly.

There are a lot of places on a CBG where we might obsess with keeping things square when it really doesn’t matter functionally as long as it looks good. It’s often a mistake to assume the box is square, so be prepared to make your work fit the box rather than your square.

Hi, here is the way I line up my necks on CBG's.
I use a long straight piece of hardwood with centre marks at each end in the form of a saw cut. this is laid out on the neck, as shown, with a projection point where the centre of the bridge or the tailpiece will be. The straight edge is clamped to the neck/fingerboard, and at the tail end if needed, and I can then do the required marking and fitting.

I use a similar aid in a similar way for setting the height of the bridge and neck back angle if needed.

Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

smilingdog1 commented on 3 String Blues's video
1 hour ago
smilingdog1 liked 3 String Blues's video
1 hour ago
smilingdog1 liked Glenn Kaiser's video
1 hour ago
Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
3 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
19 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
19 hours ago
Kent Thurston updated their profile
20 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
21 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
21 hours ago
Poorness Studios liked A.D.EKER's video
23 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
23 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->