Hi,,,,I am making my 1st scarf joint.  I am using 3/4 inch stock and want to resaw it to 5/8 inch to fit the depth of the tuners.  When do I cut the thickness?,,,,before or after I make the angled cut for the scarf joint?

Views: 136

Replies to This Discussion

It depends on tools you have available as to best method. I run a full board of 3/4 through a desktop plainer to get my 5/8 and cut that into a bunch of head stock. However, you can go ahead and cut your scarf and take your down your head stock piece down by sanding or whatever means available to you. I find it much easier to reduce thickness when they are separate and it looks cleaner. Plenty of Youtube vids on scarf jigs.

I glue the joint then measure 5/8 (or 1/8 from the top) and make the cut with a band saw. Then clean the top of the cut with a file and sandpaper. You really can just rasp the 1/8 off. Be sure to take it off the top so the tuners have the flat surface to mount.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Adhesive Removal

Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12, 2022. 9 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fantacone Box Works Mar 12, 2022. 7 Replies

scarf joint

Started by PattJ. Last reply by Fantacone Box Works Mar 12, 2022. 2 Replies

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11, 2022. 4 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 15, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 19, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
Thumbnail

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

"They actually sound great, but I like the fact that they won’t break if you drop em! "
2 hours ago
Carl Floyd liked Moritz Voegeli's discussion Joseph J. Rogowski about Current Based Pickup Design
4 hours ago
A.D.EKER commented on Dar Stellabotta's video
Thumbnail

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

"Great Sliding ! But to be honest i dont hear that much a differens,  beleave the Glass is a…"
9 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"thanks AGP;# ! much appriciated !"
9 hours ago
Crazed Fandango added a discussion to the group Introduce Yourself!
Thumbnail

Better late than never...

After joining this forum in 2014, I finally have my 1st CBG which my wife bought for me at the…See More
11 hours ago
Bernie Edwards liked J. D. Woods's photo
11 hours ago
Crazed Fandango joined Cigar Box Nation's group
Thumbnail

Introduce Yourself!

We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to…See More
11 hours ago
Crazed Fandango liked Nomad Jack's discussion Busking Songs...
12 hours ago
Fantacone Box Works commented on Dar Stellabotta's video
14 hours ago
Fantacone Box Works commented on Ghostbuttons's photo
Thumbnail

Four projects

"Very nice"
14 hours ago
Dar Stellabotta posted a video

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

In this video I compare the three different wooden slides made by David Bell and Phil Young up against my Dunlop glass slide! I gotta say these wooden slides...
14 hours ago
Fantacone Box Works posted a status
"Thanks Brian. We'll that's mighty exclusive."
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->