I decided I was going to build one of these after seeing a video on youtube(www.youtube.com/watch?v=0qFxXhg6zwA) of a electric one, but you can also build an acoustic one too.
What is a Tres Cubano you may ask?
It's a short scale(23" to 24") 6 string guitar that has the strings paired into 3 groups of 2. They use small gauge strings and pair the D string with high E, then 2 B strings and then a G string with high E and tune it gG-cC-dD(lower case is octave higher)like half of a 12 string guitar.
They are often used in Salsa music.
I got a couple short scale Strat type guitars for kids, but they were trashed. So I decided it would be better to build one out of a Cuban Cigar Box since my cousin gave me 4 Cohiba boxes.

Views: 321

Replies to This Discussion


My box after layout of the 3 Gitty Lipstick Tube Pickups. I modified the middle pickup to be RWRP for noise cancellation in the combo positions. Using a 5-way switch,250k pots and .047 cap to start off with. May change the pot/cap values later after hearing it. I also have a gitty "rail runner" rod piezo bridge that I'm considering adding to the pickups. That may change later too.

I messed up the neck/headstock joint when I glued them together without a pin. It was clamped and in place, but moved later before the glue dried. I usually use a pin when gluing, but didn't because it looked like it was going to stay. Should have known better.
Titebond Original is what I use and it works great, had to use my Exacto saw blade to cut them apart. Then it was dry fit and clamp, pin, take apart and glue, realign and pin and clamp to set.

I glued a through piece in the box for the neck to bolt onto with spacers to support. Needed a 4mm spacer to allow the fretboard to go over the top of the box. Tried to cut one, but that ended in disaster. Found a extra paint stir stick left over from recent home painting, it was exactly 4mm thick. Wasn't wide enough so I cut 2 pieces and cut off the excess. I have some degree cut shims if I need them later for neck angle.

The box wood is very dry and cutting out the pickup holes resulted in some splinters around the edge and there's a couple of oops cuts around the edge from the saw, good thing Gitty sells pickup rings for these.
Here's a pic of the through piece and spacers in the box.


Wondering how well this piezo bridge is going to work with passive controls, never done it before, but there's enough room for a preamp if needed.
These pickup surround ring are great looking, guess someone forgot the pickup heigh adjustment screw holes.

That’s kool, Paul! An actual tres cubano is basically a spanish classical guitar with three sets of strings, so you’re right on using a box since it’s an acoustic instrument. I converted my classical for awhile back  in my teens, it’s really fun if you have a busy playing style. Ry colder went all the way to Cuba to learn & jam with famous tres cubano player Papi Oviedo, what a lucky guy!! Keep us posted!!

I'll keep posting it. Posting on the Friends of CBGitty too on FB.

This is kind of a mix between the modern and the classic with the electric involved and uses strings from 2 sets. I'm using 2 Southbound 4 string sets to make it.

Definitely different from the usual.

Is that a Rail runner bridge?

Yes it is. Haven't tried one yet, so I thought I'd give it a go.

Plugged the pin hole in the neck/headstock.

So the Gitty Lipstick Pickups come with the wrong pickup mounting screws. The base is made to mount to a box top or pickguard like a Strat. The holes in the base are threaded with a fine thread, which I found out to be 3mm x .50 and got the 20mm long for this application. The mounting screws supplied are too small for the base, coarse thread and too long( very much like the PBass pickup screws.

Anyway, I got the pickups mounted.

Got my headstock laid out. Ready to cut the trussrod channel and headstock design.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

smilingdog1 commented on 3 String Blues's video
33 minutes ago
smilingdog1 liked 3 String Blues's video
35 minutes ago
smilingdog1 liked Glenn Kaiser's video
36 minutes ago
Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
2 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
18 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
18 hours ago
Kent Thurston updated their profile
19 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
20 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
20 hours ago
Poorness Studios liked A.D.EKER's video
22 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
22 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->