Long time guitar player here, but I'm mostly an electric bass player these days.  Anyway, someone posted a link to a Samatha Fish video on the TalkBass forum a couple of weeks ago.  That put a burr under my saddle re- CBG.  I have a tad of building experience, I made two electric bass guitar bodies last year.  Paired with bolt-on commercial necks, that was fine and worked well. 

Anyway, low and behold last week at the community garden, there's a wooden cigar box sitting on the "Free" shelf.  The guitar gods had spoken, apparently. 

Anyway, I snagged it and used the community shop CNC laser to burn an F-hole in it yesterday.  Soaked some hardware from the junk box in vinegar night before last to age it.  That worked well.  Next up -  hunting for neck wood.  I think I'll buy a pre-slotted fretboard to epoxy to the neck. 

 

Views: 520

Reply to This

Replies to This Discussion

Position markers laid out on the fretboard and upper side of the neck.  Light coat of Danish Oil to seal the wood in preparation for CA gluing the markers. 

Neck is walnut.  Sadly, not exactly quarter-swan.  Almost exactly 1.5" by 0.75".  Rear of neck has only been rounded over with a 3/8" "router bit, so I have some shaping to do.  But it seems appropriate to do the markers first, while the back is still mostly flat.  

Hi, neck looks nice. The bridge should ideally be positioned in the most responsive part of the top, so it can excite the top and air in the box into movement, vibration and sound waves. At the moment those are limited by the close position of the bridge to the sides.
However it will sound ok, but not the best.

I like to put the bridge in the "sweet" spot, before I start, then plan scale ect, around that. Next build will be better and the one after that better again.

I like your thought process though.
Taff

Interesting thanks.  Not too worried about the unplugged sound, frankly.  I'm prone to practicing while others are sleeping.  If it's too "responsive', I'd likely wedge the top with some foam or whatever.  

Seems that it'll look funny with the FB not snugged against the box.  I guess it's a cigar box, it already looks funny.   

Yep, with odd/different size box's there are always compromises to be made.

Here is what you are talking about. The fingerboard does not go up to the body/box.

Still works and sounds fine.

Taff

Back on the laser today. 

Created a control plate out of 1/8" ply.  Since the box itself is a bit too thick for the shafts without some tedious Dremel work.  I'll laser the hole in the box later.

Burned a logo on the headstock.  Not much room.  J&L are our two dogs, Jack and Libby. 

Overall, I'm pleased. 

BrianQ - Thanks for the burning tip on the metal, that worked well. 

Position dots installed and neck heel glued up.  The dots were a royal pain on the face due to the frets.  Hard to sand.  I wouldn't even install them on the face next time. 

Hi, the first thing I noticed about that neck when you said fitting markers was it is best done before fretting.
Anyway, another lesson learned.looking good nice and neat.
Cheers Taff

Re- markers before fretting.  Totally agree, but I bought a pre-fretted neck, so I was kinda stuck. 

Good afternoon in the shop. 

- Neck shaped.  All done with orbital sander followed by hand sanding in grain direction.

-Walnut supports cut and glued into box.  The tail one is cut back on the lower half to allow more room for controls. 

-Neck cut back for box top and also cut back at angle to (hopefully) give better string angle, higher bridge etc.  Found good advice on this somewhere.   I marked the one end 1/4" deep and the tail end 1/2", then hit it with the big bandsaw.  According to my (poor) geometry, 1/4" drop across 8.5" is somewhere in the ballpark of 1.5 - 2 degrees. 

Hi Lark, if I want to raise the bridge height I would tilt the neck back. If as you explained you lower the tail end that would tilt the neck end up. Raising the string action, so would mean lowering the bridge to get the desired action.

Tilting the neck back lowers the strings to the frets, this allows for a higher bridge setting. Maybe that's a typo re your deeper recess at the tail end. Forgive me if I have misinterpreted your meaning.
Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
6 hours ago
BrianQ. commented on Dar Stellabotta's video
11 hours ago
BrianQ. liked Dar Stellabotta's video
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
13 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
15 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
15 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
17 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
17 hours ago
A.D.EKER commented on Ricky D's photo
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->