Long time guitar player here, but I'm mostly an electric bass player these days.  Anyway, someone posted a link to a Samatha Fish video on the TalkBass forum a couple of weeks ago.  That put a burr under my saddle re- CBG.  I have a tad of building experience, I made two electric bass guitar bodies last year.  Paired with bolt-on commercial necks, that was fine and worked well. 

Anyway, low and behold last week at the community garden, there's a wooden cigar box sitting on the "Free" shelf.  The guitar gods had spoken, apparently. 

Anyway, I snagged it and used the community shop CNC laser to burn an F-hole in it yesterday.  Soaked some hardware from the junk box in vinegar night before last to age it.  That worked well.  Next up -  hunting for neck wood.  I think I'll buy a pre-slotted fretboard to epoxy to the neck. 

 

Views: 520

Reply to This

Replies to This Discussion

Burning them with a torch is a quicker way to deconstruct the finish of metal? Good luck on this build, have you checked out the cigarboxguitar.com archives down the bottom right side of the page, plenty of build info there?

Welcome to the rabbit hole. That’s a great lookin’ start!

Welcome Lark, nice to see your project taking shape. Epoxy glue isn't really needed to hold a fingerboard onto the neck, but if you already have it, it won't hurt.

Enjoy the journey.

Taff

I ordered a fretted walnut neck today.  I felt myself getting pulling into a neck building vortex.  I'm a perfectionist and it ain't pretty when it hits.  Awake at 3 am pondering options, etc.  I had some Paypal money sitting there and what better use? 

I did find a recommendation somewhere on the 'net for using the left handed bolt from a cheap turnbuckle for the bridge.  Point being, the bridge generally needs to be angled so the higher strings have less scale length.  The left handed thread aligns better with that bridge orientation.  So I bought a turnbuckle at the big box store today.  

I think I'll settle on GDG tuning.  I was really leaning toward DAD, given my guitar/bass playing and that feels "closer" to what I'm used to.  But - best I can tell -  the majority use GDG.    I'll likely stay low.  I like the low end.  

QUESTION!!

Thinking about the fingerboard and the box top.  How close should these be to the same height?  I had been thinking that I want the base of the fingerboard flush with the box top, meaning the top of the FB would be 1/4" higher than the box.  Is that right?

Hi again, what guides my design is bridge height and position and of course string height over the 12th fret.

I look for a bridge height, say 1/2" as this will give me a decent back angle to the strings, and down loading on the bridge.

Then I would look at the lay or positioning of the fingerboard/neck, (will putting them flush or above the top give me the string height I want)

I find that with the f/b over the top plus fret hight plus string height at the 12th fret will give me suitable bridge height. If not I would consider changing neck angle.

There's other ways, this works for me.

Taff

Thanks Brian and Taff

Yeah it's dawning on me that it's all about the bridge height.  I'm thinking a long straightedge on the frets with the bridge in place will get me a good place to start.   I'm used to Fender style neck pockets and necks with truss rods.  Meaning more adjustability than a set neck with no truss.  On the other hand, the worst thing that can happen is I go too deep and need to buy another cigar box.    

This video really helped my understanding.  Graphs starting around 11 minutes. 

https://www.youtube.com/watch?v=Bb2YnBoZZDI&t=711s

Another helpful link here re- string height, neck angle and more

https://cigarboxnation.com/m/blogpost?id=2592684%3ABlogPost%3A21807...

Tailpiece is done.  Strike plate from the junk box, 1/8" holes drilled at 21mm centers, black chalkboard paint.  I want 19 mm spacing at the bridge to match both my basses.  

Attachments:

My neck came in, it's 25.5" scale already fretted in walnut.  The fretboard is 18.25" inches long.  If I butt this against the side of the box , then the bridge will be 7.25" from there.  My cigar box is 8.25" wide.  It seems to me that this puts the bridge too close to the end of the box.  BTW - I'm not doing a neck through, although I could.  My plan was to screw a tailstock to the end of the box.  I'd certainly have plenty of break angle.  Is this something to worry about?  Should I plan on moving the neck back, leaving the FB "sticking out" a bit from the box?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
12 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
12 hours ago
Kent Thurston updated their profile
13 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
13 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
14 hours ago
Poorness Studios liked A.D.EKER's video
16 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
18 hours ago
A.D.EKER commented on A.D.EKER's video
22 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
22 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->