I would like to build a sold body. But I do not own a router nor have ever used one. Does anyone notch the back with hand tools? Any tips or pointers?? TIA!

Views: 144

Replies to This Discussion

Hi T

You could try with a paper template and forstner bits, it's what I used before I owned a router

My first 3 solid bodies, I did with just a drill, jigsaw and a handsaw.

As Pickedmoor Jon suggested,  a paper template will help to bring your design to reality.  Have one ready before cutting some wood.

I have a router but I never used it to carve out bodies from wood.  My trusty Black & Decker drill and Craftman jigsaw does that job well for me.  My method is that I use layers of plywood.  I cut out the body shape from 1/4 inch ply. With the template, I can cut out 6 body shapes identical.  The first 3 shapes, I cut out the cavities for the  neck, electronics and humbuckers (good to have a template of that too). For the forth shape, I deepen those cavities a little bit further but not completely through the wood. The fifth and sixth, I leave alone.  Then glue all 6 shapes together, clamp it for an hour or two and viola, you have a body. Its way easy to stack the body like that than to route out a 2 inch thick piece of wood.

Of course, at that point, the edges will be crooked, with an 80 grit sanding drum bit you can smooth it all down. Or, what I did, before I had that sanding bit, I smoothed the sides with a putty resin. Kind of like ceramic clay but this stuff turns to hard plastic. Then I spray paint it all.  But if you want to keep the wood grains showing, then use a sanding drum bit. They come in many sizes, small ones are cheap and thats the one I use on my drill.

Happy building. :D

Good info, thank you Gents!

The above mentioned tools are great along with a set of sharp chisels and hammer.

Here is an example of my work. The top piece is my veneer which is a 1/8" thick of birch ply by Revel (yup, like the model kits). I get these at the art store.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Hand Tools Only?

Started by T-Gripped. Last reply by ILL GREEN Mar 2, 2019. 5 Replies

My 2nd first solid body guitar

Started by Nick Johnson. Last reply by Paul Craig May 28, 2016. 1 Reply

Richey Kay #49

Started by Richey Kay. Last reply by gary sheldon May 8, 2016. 7 Replies

Richey Kay #31 - my first solid body

Started by Richey Kay. Last reply by Richey Kay Jan 26, 2016. 5 Replies

Kensi, my Dark Fae Spellcaster

Started by Kel Wilson. Last reply by Matt McCarthy Dec 12, 2015. 6 Replies

electrify a solid body

Started by vinny brig. Last reply by Ricky Johnson Nov 10, 2015. 5 Replies

23 inch solid body Tenor Guitar #165

Started by G.S. Monroe. Last reply by The Phrygian Kid Nov 5, 2015. 3 Replies

Help

Started by Leadfoot T. Last reply by 0xp0lyyfdwzrt Nov 4, 2015. 4 Replies

The Blacksnake

Started by Randy S. Bretz. Last reply by Randy S. Bretz Nov 25, 2014. 2 Replies

Blackwood resonators, June 2012

Started by The Phrygian Kid. Last reply by The Phrygian Kid Jan 13, 2013. 7 Replies

Are you ready for a Football Soild body CBG?

Started by Bob Lumpkin. Last reply by The Phrygian Kid Aug 18, 2012. 3 Replies

Cases

Started by Steve Terry. Last reply by Bob Lumpkin Aug 18, 2012. 2 Replies

fitting the neck to the body

Started by jabes. Last reply by The Phrygian Kid Jul 11, 2012. 3 Replies

Tailpieces

Started by Randy S. Bretz. Last reply by Wichita Sam May 17, 2012. 3 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
1 hour ago
BrianQ. liked Dar Stellabotta's video
1 hour ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
3 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
3 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
5 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
5 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
6 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
7 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
7 hours ago
A.D.EKER commented on Ricky D's photo
7 hours ago
A.D.EKER commented on A.D.EKER's video
7 hours ago
Keith Rearick liked Doug Thorsvik's video
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->