Replies to This Discussion

Permalink Reply by Don Thompson on October 4, 2010 at 2:39pm

Do you mean dots? A bit of info might be helpful if you want help.

• ▶ Reply

Permalink Reply by Michael Gajeski on October 4, 2010 at 2:53pm

lowes has samples of laminate for counter tops in tons of different styles. pick up some, go at them with a coping saw or a dremel and you're in business for $0.

• ▶ Reply

Permalink Reply by Alex on October 4, 2010 at 4:04pm

Yes, I mean dots. Sorry for being unclear.

• ▶ Reply

Permalink Reply by Richard Markham on October 4, 2010 at 5:33pm

I've only built three CBG's so I'm new to this also . CBG #! no dots . On #2 fretboard (#3 CBG) , having cut gemstones for years I used abolone . But it still takes time to do the "lapidary" thing . Then one day looking for a pick (always) I stumble across a heavy Fender "pearl" pick . I then took the "sacrificial" pic to my jewelers bench and grabbed a "hollow" punch that i use for making silver buttons . Think cookie cutter . Using a 1/4" punch = 6-7 "dots" . A matter of seconds . A paper hole punch might work ? My "hollow" punches (wad cutters) are old school , but I think the HF discount tool place may have them if your into saving $$$ like the rest of us .

• ▶ Reply

Permalink Reply by Brian Watson on October 4, 2010 at 11:05pm

Check these folks out

http://www.jacquardproducts.com/products/pearlex/powders/index.php

I have used the Pearl ex pigments for a whole bunch of projects. I buy the 3min. two part epoxy and mix just a little bit of the color in one side of the epoxy. It works best if you use one epoxies that has the self mixing nozzles. just drill a small hole fill it with the epoxy mix, let dry, then sand. One jar of the powder last a long time.

• ▶ Reply

Permalink Reply by Don Goguen on October 4, 2010 at 11:35pm

I buy much of the hardware I use on Ebay including MOP dots. A quick search will net numerous sizes and colors. The seller I've used a lot is woodenspoke not quite as cheap as $12 per 50 but close. They are based out of Colorado and shipping is reasonable.

• ▶ Reply

Permalink Reply by Don Thompson on October 4, 2010 at 11:36pm

http://www.guitarpartsusa.com/cat--Inlays-Pre-cut-Guitar--MAIN20
flat shipping fee of like 6 bucks, so worth it to check out other stuff.
Don

• ▶ Reply