Hi All,

Just finished building my first CBG and pleased with the result until I tried to string it.   Used strings 2,3 and 4 from a set of Dunlop nickel wound electric.   These are 42,30 and 17 gauge respectively.   Used a digital tuner to tune to G,D,G.   The 2 string snapped as I reached the correct pitch (G).   As I had only the one set of strings on hand I decided to go with 3,4and 5 (13 gauge).   Got to G on the top string but it was quite dead so tried to take it up to A but it too snapped before it got there.

I can't believe it's a fault with the strings.

The neck is a "through-the-box" and the strings go through grommets in the tail stock so there's no issue there.  In both cases the break occurred at the machine head.

Most disappointing.   Was hoping to play it this weekend.

Any help/suggestions greatly appreciated

Views: 246

Replies to This Discussion

Morning, Arthur.

There can be several reasons for string breakage on new builds. I'll try and suggest a few then I'm sure others will be able to help some too.

Check the machine heads for burrs or sharper bits to make sure that's not why they're snapping at the machine heads.

Make sure your break angle over the nut and/or bridge isn't too severe. If it's too steep of an angle going over these then that can create similar issues.

Along with break angle, if you're building a slide guitar, make sure your string height above the neck or fretboard isn't too high. Better a lower action even for a slide guitar unless you're building to lapsteel specification?

As you said they're new strings I won't suggest avoiding using old strings.

Last one I can think of right now is make sure you're tuning to the correct octave of GDg. Even with an electronic tuner it can be easy to tune past the correct octave tuning to a higher octave that the strings weren't meant to tune to. Unfortunately I don't know what the correct octave is or whether your tuner gives a readout for octaves but generally you should be able to depress the strings without too much pushing.

Try these things and as mentioned I'm sure others will be around to help soon. Have a great day and best regards,

Bear :0)

Many thanks.   I'll check it all.

Art

the correct octave is G 2nd octave D 3rd and G 3rd. I got that from a book while trying to string my first build last weekend. It worked great!

Thank you.   That's good info.

Art

Deburr with fine sandpaper, I’m sure it’s a sharp point somewhere? Tuners can have sharp edges? Good luck.

Thanks Brian.   That was suggested earlier.   I think it's the most likely.

Arthur, I have been using .044, ,034 & .026 and have never broken a string. Generally build to a 25.5" scale and tune G,D,G.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
27 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
1 hour ago
A.D.EKER commented on Ricky D's photo
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->