Looking to buy a slide for a 4 string CBG. Not sure if I will be using it on pinky or ring finger. I'll probably have to get a few to try out. Thinking either glass, ceramic, bone or ??? other than metal. Not sure if I should get a short/stubby one or not. Anyways any suggestions? There's no guitar shop near where I live so I gotta shoot in the dark here. 

Views: 749

Reply to This

Replies to This Discussion

I like a slide that is long enough to cover all the strings if needed. Brass and glass seem to be most popular. They're relatively cheap so trying different ones until you find what you like is probably the way to go. Just my thoughts.

If you haven't played slide before, I'd say your best bet is to try various cheap things first, like a socket from a ratchet set, or a piece of pipe.  Worry about the tone you like, after you figure out which finger you'll prefer.  Most likely, if you enjoy playing with a slide, you'll wind up with a boat load of slides anyway.  Start cheap ... borrow a pipe cutter and try different lengths and diameters. 

Dunlop 222 Brass slide. $4 - $6 bucks and a great starter to give you an idea of what you'll like. When I first started guitar years ago i went down to a plumbing/hardware place, stuck my finger in a bunch of pipes, and had them cut me off a 2 1/2" piece of one that i liked the fir on. Used a small round file to smooth the inside of the cut. It was pretty good, but a tad raspy.

  

Does the word "bottleneck" spring to mind.

Taff

Ditto on the pipe idea, go to a hardware store to the copper pipe fitting section and try some couplings, I have also used electrical conduit connectors 

Glenn Wat has a utube video on making one from copper tubing that is great.

Thanks for the suggestions. Well perhaps I'll order a few cheapo glass slides or watch a Youtube video on how to make one myself. 

Hi, beware of real cheapy glass slides some can shatter pretty easily.

Taff

Never put a glass slide in your hip pocket!

The ladies on YouTube will show you how to cut the neck off a soda bottle with thread, fingernail polish remover, and a pot of ice cold water. Oh , and a match.,.,works great.,.,you can sand the cut with sandpaper or smooth concrete, like a sidewalk.,.,,.just a thought. Deep well sockets are $3 , or copper pipe (usually needs polishing).,.,

Hi my first slide was a length of brass rod that I drill out to suit my finger size. the hole was tapered so it fits perfect. Still use it, its my favourite.

Taff

Thought I'd give this one a try: Planet Waves Glass Slide

Good place to start. Similar to what I use.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->