Comment

Comment by Danny Gordon on June 29, 2018 at 9:23pm

OK THANKS I WASNT SURE WHETHER TO GLUE IT THERE OR RIGHT TO THE BACK OF THE LICENSE PLATE UNDER THE BRIDGE

Comment by Jeff 'Bones' Reilly on June 29, 2018 at 9:05am

I glue mine on under side of through neck in bridge position here's a few pics hope it helps .

Comment by Taffy Evans on June 28, 2018 at 12:35pm

HI. 

If you find that you really need a pre amp you can get them as and endpin jack about the diameter of a pen and about half as long, just need room for the battery.

Taff

Comment by darryl kernaghan on June 27, 2018 at 10:31pm

Danny, somewhere near the bridge on the bass side is the general practise, but many do it elsewhere for a variety of reasons, the good thing about the box being open is that you can try different positions to find what you like before sealing the box. "Cause the Blue Rat" has a thread running in the forum section under "Squall bucker piezo" atm which might help you a bit.