Does anyone or has anyone used two  6 string humbuckers to make an 8 string lap steel? If so how did you configure the pole pieces or place the pickups?

matching  up with the 8 strings more important than looks. (Could be 8 or more strings)

thank you for any input and advice. I can’t afford an 8 string pickup at this time but do have several  inexpensive humbuckers with 6 pole pieces.

Views: 499

Attachments:

Reply to This

Replies to This Discussion

Depends on your string spacing, but you might be better with a pair of P Bass pickups.

The P Bass pickups are a good recommendation.

You could also use 2 Lipstick Tube pickups wired in series. 

Thank you for the pbass pickup idea for lap steel ...any suggestions on which pots and capacitor are better suited for bass pickups considering its for lap steel? I have some Wilkinson pbass type pickups that are about 9.3 ohms. I’ve never used or installed a bass pickup only guitar pickups. Also I have no idea since the pickups are already joined by a wire already which would be the pickup closer to the bridge etc...does it matter in this situation ? Thank you again.

If you use P Bass type pickups, they single coils so use 250k pots and .047cap, just like you would on any single coil pickup.

CBJ,

Thank you the reply!. Glad I asked.

If they sound too dark, you can go up to 500k pots and .022 cap or even use 1meg pots depending on the tone your looking for.

Looking to make it sound bright and lush but not harsh....I guess I’ll know how the pickup sounds once it’s wired...never had a bass pickup so I’m not sure how it so supposed to sound if it was used on a bass and not a lap to begin with....

My avatar guitar has the Pbass pickups with a 250k volume only and works fine for that.

Usual slide guitars can be bright sounding or you can go for the usual guitar tone.

Start with the 250k pots and .047 cap like CBJ suggested, then increase the volume pot to 500k, then consider a .022 cap if it's still darker than you want.

Well, the pbass pups are cool and there’s a beginning of a cavity. Reading my fill of pbass pups. I understand the way to wire to the pots etc but HOW THE HECK DO YOU HIDE The extra wires that not only join the two pups but stick out of the bottom of the pups instead of the side like guitar pickups. Cant seem to find a decent pic of the manner in the two pups joining wire stays hidden. Most likely I’m having a mental block and even if I used a pickguard still odd..

The cavity is gonna be different as it’s a lap steel not a pbass. Still the extra wires.... Do they go under the foam somehow? Seems like the pickup covers would cut into the wires. Very confused here and been reading and looking at pics of pbasses but not sure..

I had to cut the wire on my guitar to wire the pickups to a 4-way switch and the pickups come through the top from the bottom, so no problem with wires.

Most guitars  mount the pickups in a pickguard or mount to the body in cavities. The cavities usually have holes drilled to route the wires or a channel to run the wire and cover with a pickguard.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
3 hours ago
BrianQ. liked Dar Stellabotta's video
3 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
5 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
5 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
7 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
7 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
9 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
9 hours ago
A.D.EKER commented on Ricky D's photo
9 hours ago
A.D.EKER commented on A.D.EKER's video
9 hours ago
Keith Rearick liked Doug Thorsvik's video
13 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->