Cheap meatal spatula for a tail piece. Good Idea or no?

Found this spatula I think I could bend into a tail piece to run the strings threw. Kinda anchor the strings and be used as a tail piece. Has anyone done this or think it would workout for just a 3 string

Views: 691

▶ Reply to This

Replies to This Discussion

Permalink Reply by J.D. on May 16, 2017 at 3:00pm
Of course I already have a bridge "eyebolt".
Permalink Reply by Ron "Oily" Sprague on May 16, 2017 at 4:39pm
Yep it's been done. I use curled forks for mine. It'll work, go ahead.
Permalink Reply by J.D. on May 17, 2017 at 12:55am
Would I use a torch or heat gun to bend it and also I would need to cut off the handle right?
Attachments:
Permalink Reply by Ron "Oily" Sprague on May 17, 2017 at 6:57am
Chreap solder on the handle, should be able to just force it right off. Put it in a vise, and just lightly hammer it over, no heat needed.
Permalink Reply by J.D. on May 17, 2017 at 12:54pm
Your probably right Ron. They are only 1$ new.
Permalink Reply by Primitive Acoustics on May 17, 2017 at 2:22am
Looks like you might be able to bend it in a padded vise. A torch would probably alter the finish. I'd cut the handle off.
Permalink Reply by J.D. on May 17, 2017 at 12:55pm
True!
Permalink Reply by Paul Craig on May 20, 2017 at 8:30am

Got this pie server from the local Goodwill store.

Permalink Reply by Lonman on May 21, 2017 at 4:05am

nice, thanks for sharing- I have had thoughts of forks and such, never had done yet.

Permalink Reply by J.D. on May 20, 2017 at 8:39am
lookin good ,I would like to see it when its finished. Im still learning the ropes. What did you cut the spoon with "if you don't mind me asking?"
Permalink Reply by Paul Craig on May 20, 2017 at 8:46am

I used a angle grinder with a cutoff wheel. Finished it awhile back. I use it as a lap steel. It has a piezo under the plate, one HB with coil tap wired to a 3-way switch. 500k volume for HB and 1meg volume for the piezo.

Permalink Reply by J.D. on May 21, 2017 at 2:44am
Oh nice! "I don't own a angel grinder ,but thinking of cutting the spatula to size "if all goes as planned" ,which for me it usually dont ,but I want to do a six string build using a Bolton neck myself anyways looks Unique "Looks great Paul" Thanks for the advice & photo!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Forum

Song lyrics for Steve's new song

Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 15 hours ago. 4 Replies

AI Search Query - Curious Answer

Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER on Wednesday. 4 Replies

UK - Best Place to Buy Cigar Box's

Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies

Are metal frets necessary?

Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies

Joseph J. Rogowski about Current Based Pickup Design

Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Flat bucker under box top. Any Success?

Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies

Has anyone tried this? Thoughts?

Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies

just came accross this pickup idea on youtube.

Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply

VIDEO: Building a CBG with limited resources.

Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply

Free PDF Download: Vintage Guitar Effects Plans - 1967 Fuzzbox and 1969 Treble Boost

Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

No Harmonics

Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies

Camera suggestions?

Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies

CBG site issues, continued.

Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies

Anyone used a violin-style tailpiece on a CBG?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies

Guitar for the grandson

Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies

Building with vintage paper/pressed board cigar boxes.

Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments

.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment

Latest Activity

A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
1 hour ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
1 hour ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Here is a link to CBG 101.   https://www.youtube.com/watch?v=jy04bkM_JSc"
6 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
6 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
7 hours ago
Uncle John commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Looks great.  That looks like one I could really like playing.  Four strings too. …"
7 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Anti-Body Guitars 18,19 and 20

"Great theme, workmanship and guitars!"
7 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Angel 2x Anti-Body #17

"Very, very nice.  I hope it got to a good home and that it will be enjoyed.."
7 hours ago
Uncle John commented on Darryl Tuttle's photo
Thumbnail

Old portable heater

"Yup.  Good eye deer.  Maybe find a use for that fan too.  If not on this amp,…"
7 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

"I was whistling it!"
7 hours ago
Uncle John commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"Looks and sounds good. Built under the solar eclipse!"
7 hours ago

CigarBoxGuitar.com Knowledgebase Articles

Add a Panel-Mount Gain to a C. B. Gitty Amp Board

Cigar Box Guitar Building Tip: Neck Reinforcement with Humbuckers

A Step-by-Step Guide On How To Make a Straight Headstock

Cigar Box Ukulele Kit Assembly Guide

Advanced Cigar Box Guitar Building guide by Joshua Gayou

“Open A” AEA Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open E” EBE Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open D” DAD Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open G” GDG Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

Diatonic (Dulcimer-Style) Fretting – What it is, How and Why to Use It

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->