Better late than never...
After joining this forum in 2014, I finally have my 1st CBG which my wife bought for me at the…See More
#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!
fingerboard question(s)
My next bass project (and electric upright fretless bass), like my first one, is primarily red oak it's just easy to find the pieces I need (in the sizes I need) at Home Depot. Red oak is a decent hard wood and I can generally find something straight enough for my purposes. It does have that porous quality that makes it a little hard to use a hand plane on, but so far I've done ok with it.
In the cigar box bass I'm finishing up now, I laminated three 1/2" thick pieces together to form a straight 1 1/2" neck that fit three bass strings nicely. I put no additional fingerboard piece atop this laminated neck - it was straight and fit the purpose well enough.
This time the bass will have four strings and I've already created the neck with a tapered width - 1.5" at the nut going up to 2" at the end of the fingerboard. I'm thinking of using a flat, thin-stock fingerboard atop the laminated neck. I've located a couple possible pieces online.
First question - How hard is it to add a radius to a fingerboard? I don't have much of a workshop and use mostly hand tools, I'm wondering if I'll be able to modify the fingerboard in a way that doesn't introduce highs/lows that would show up when playing.a fretless instrument.
My second question is this - how thin/thick should this fingerboard be? If I were to go for some amount of radius, this would probably answer itself - I'd need the 1/4" stock in order to have material to shape and I can easily find 1/4" thick stock. But if I stayed with a flat neck,I found a nice looking piece of 1/8" thick stock. Is 1/8" too thin? I'm not worried about the neck warping - the laminated oak should be just fine keeping straight.
Thanks in advance,
Dan
Replies to This Discussion
-
Permalink Reply by Fomhorach on
-
I read somewhere that you can radius a fretboard with the use of a template radioused (is this a word) inversely. Wrap course sandpaper on the inside of the curve up and down the fretboard length until it takes shape and then finer and finer sandpaper for a finish.
Im not sure about this and it seems like it would take some time..Anyone else have thoughts on this?
-
-
Permalink Reply by Euraquilo on
-
Woah - that was a great clue! I went to eBay and found this:
http://www.ebay.com/itm/282237511361?_trksid=p2055119.m1438.l2649&a...
Does that about do what you're describing?
-
-
-
No. I was thinking that the curve would be inverted. Concaved. Found one online but you can make one ..
http://luthierssupplies.com.au/product_info.php?products_id=2675
-
-
-
I would make one by wrapping sandpaper around a fretboard that the frets had been taken off and rubbing a block on this fretboard, then when the block is finished it will be a template for future fretboards.
Actually.. I might try this idea myself at one point. Thanks!
-
The Essential Pages
Recommended Links & Resources
- CigarBoxGuitar.com - the knowledgebase of the homemade music movement.
- Cigar Box Music - How-to-Build CBGs DVDs, How to Play CBG and more!
- 3-String-Guitar.com - John "Red Dog" McNair's unique take on cigar box guitars and their history - lots of historic photos!
- The Cigar Box Guitar Manifesto - the mission statement and rallying cry for the Cigar Box Guitar Revolution.
Discussion Forum
Cigar box a little different
Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies 0 Likes
first bass build
Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies 0 Likes
looking for alternate tunings-
Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies 0 Likes
Building my 1st Cigar Box Bass with Cerrywood box and tiger stripe maple neck
Started by Mark Wood. Last reply by Mark Wood Mar 27, 2017. 2 Replies 3 Likes
My first bass build
Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies 4 Likes
Building my first bass
Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies 0 Likes
fingerboard question(s)
Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies 0 Likes
3 string bass questions
Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies 0 Likes
3 String Cigar Box Bass Guitar Parts
Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies 0 Likes
Does a fretless bass require a radiused fingerboard?
Started by PKB. Last reply by Euraquilo Jun 21, 2016. 17 Replies 0 Likes
Bass strings??
Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies 0 Likes
Magnetic vs Piezo pickup
Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies 0 Likes
Weed eater strings and tuning.
Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies 0 Likes
Bass Uke string question(s)
Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies 1 Like
Looking for 2 string bass plans
Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies 0 Likes
UBass strings
Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies 0 Likes
1st time builder, bass uke, is this plausible?
Started by Jared. Last reply by Hilo Greg Aug 17, 2015. 14 Replies 0 Likes
First bass build got a few questions .
Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies 0 Likes
bass frets...
Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies 0 Likes
Blog Posts
I'll be fashionable this summer =)
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Everyone can make CBG. And I did it =)
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Big Power Bank for Small CBG =)
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
Latest Activity
Introduce Yourself!
We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to…See More
Wooden Guitar Slides from Scotland 🏴 Demo!!!!
In this video I compare the three different wooden slides made by David Bell and Phil Young up against my Dunlop glass slide! I gotta say these wooden slides...
IMG_2850
"Four recent projects. All 23 inch GDG. From left (bottom):
1. 20 years ago I worked for the…"
"The know for a fact that the only way to participate is to join the FB group? I believe they do it…"
"Hi, anyone have info on the CBG Swap Off. I stay away from Facebook.
Mike"
CigarBoxGuitar.com Knowledgebase Articles
Events
-
Republic of Texas CBG Festival (8th Annual)
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes
Music
© 2024 Created by Ben "C. B. Gitty" Baker.
Powered by
