What good are these for?

pic. 1

When I first started making CBGs, I only made neck thrus. Since the box rides the neck, there is little to no need to brace the box. Now, I almost exclusively build fender style pocket necks where then neck attaches to a headblock. In this design, the box must carry the "weight" (tension stress) of itself, plus string tension, plus all the weight of electronics, and the neck. So, now I almost always brace the parameter of the box.

The problem is clamping the glued up bracing strips. On the tail and the side away from the folding top it is easy to get in clamps. no so much in the side bearing the top.

pic. 2

So, cutting thin wood strips about 1/2" wide and slight longer that the gap between the braced sides allow you to clamp the bracing piece in place while the glue dries. quick easy and cheap. It also works well.

pic. 3

It's something that you'd assume everyone knows how to do, but it took me years to trip across it.....Hope this helps someone.

Views: 608

Attachments:

Replies to This Discussion

Good idea.Thank you for that...

I like that tip. this change from neck thru to Fender style does it play different? It seems it looks nice but is a lot more work if not a better playing instrument.

I think you can build a more "flexible" instrument that you can set up in a variety of ways.  more or less neck angle, lower or higher bridges,  more room inside the box for electronics and ease of installation of electronics.  And, things change.  I had a three string fretted that never played like I wanted, built and installed a fretless neck and it is now one of my favorites.... 

 

I do think I wouldn't bother for an acoustic or piezo pickup instrument.  But is almost essential for License Plate CBGs

Why?  Is it due to the size of the pick up or something?  Just curious.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Fret Jig

Started by Scott Schoepf. Last reply by Gary Stenzel Mar 2, 2017. 2 Replies

I Was Going "Nuts"....!

Started by Slowpaw Steve T. Last reply by Gary Stenzel Feb 21, 2017. 6 Replies

box bracing

Started by Wichita Sam. Last reply by Gipson Fat Fingers Shoemaker Jan 24, 2016. 4 Replies

Diamond core drill bit for fret dots etc

Started by Titch the Clown. Last reply by Gipson Fat Fingers Shoemaker Jan 24, 2016. 4 Replies

Special Tools

Started by Gary Ross. Last reply by gary sheldon Mar 19, 2015. 1 Reply

indispensable..

Started by Seasick Mick. Last reply by gary sheldon Jun 3, 2014. 10 Replies

Power string winding bit

Started by Titch the Clown. Last reply by Thomas "Duck" Petry May 10, 2014. 2 Replies

Raised Work Table

Started by David McQueen. Last reply by Thomas "Duck" Petry Apr 28, 2014. 3 Replies

Top Gluing Frame

Started by David McQueen. Last reply by David McQueen Apr 28, 2014. 2 Replies

Home made drill press

Started by Jimbo Cawthron. Last reply by Mike Strehlow Oct 21, 2013. 6 Replies

Wine bottle cutting jig

Started by Jan Westphal. Last reply by Mike Strehlow Oct 20, 2013. 4 Replies

Benchtop guitar clamp

Started by Mike Strehlow. Last reply by stringybark Oct 19, 2013. 1 Reply

Cutting Fret Slots on a Bandsaw?

Started by Habanera Hal. Last reply by Lou "cubancigar2000" Feb 25, 2013. 6 Replies

Hot hide glue pot and storage

Started by Charlotte Henry. Last reply by David McQueen Feb 10, 2013. 3 Replies

Spoke Shave

Started by Bluesheart. Last reply by jabes Jan 2, 2013. 5 Replies

tiny tools

Started by Bluesheart. Last reply by Habanera Hal Aug 19, 2012. 2 Replies

Homemade fret-end beveling file

Started by Turkeychicken. Last reply by PhilUSAFRet Mar 29, 2012. 2 Replies

Anyone use the stewmac dragon rasp?

Started by Charlotte Henry. Last reply by Charlotte Henry Mar 11, 2012. 31 Replies

Rotary Rasps

Started by PhilUSAFRet Mar 8, 2012. 0 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
7 hours ago
BrianQ. commented on Dar Stellabotta's video
11 hours ago
BrianQ. liked Dar Stellabotta's video
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
13 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
15 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
15 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
17 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
17 hours ago
A.D.EKER commented on Ricky D's photo
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->