Replies to This Discussion

Permalink Reply by Tracy Kennedy on May 25, 2010 at 3:33pm

Ive seen them at both Hobby Lobby and Kmart

• ▶ Reply

Permalink Reply by Jon Pruett on May 25, 2010 at 4:01pm

Try Michaels craft store if you have one locally

• ▶ Reply

Permalink Reply by David L. on May 26, 2010 at 2:21am

Hi,

There are a few suggestions in these old discussions which are worth looking at.

http://www.cigarboxnation.com/forum/topics/trim-rings-for-bigger-so...

http://www.cigarboxnation.com/forum/topics/help-with-sound-holes?co...

Regards,
David

• ▶ Reply

Permalink Reply by Paul Doug on May 26, 2010 at 5:34am

Look in the area where they sell tarps. Those grommets work great. Got mine at ACE but any hardware or big borg store will have them

• ▶ Reply

Permalink Reply by BenBob on May 26, 2010 at 6:19am

I keep waiting for someone to put in a borg store around here. I'll take a 7 of 9 in brunette please...

Paul Doug said:

Look in the area where they sell tarps. Those grommets work great. Got mine at ACE but any hardware or big borg store will have them

• ▶ Reply

Permalink Reply by Mark Werner on May 26, 2010 at 7:18am

Most hardware stores have a shelf of "odd parts" arranged in little drawers. That's where most of 'em have the big grommets..Usually up to 1" or so. These parts bins are a treasure trove; I always look through them.
Another handy sound-hole trim is "computer grommets" these are plastic stepped rings up to about 1 1/2" diameter. Usually, you can get them in black, silver, gold, or a dumb gray (that you could paint...). They work quite well as trim on larger soundholes.

• ▶ Reply

Permalink Reply by MikeBoy on May 26, 2010 at 1:53pm

These work great too!

Candle Cup Brass Plated Inserts 29/32"

Most craft stores have them in the candle section.

• ▶ Reply

Permalink Reply by Salty Sea Empire on May 27, 2010 at 9:23am

nice might be able to find these


MikeBoy said:

These work great too!

Candle Cup Brass Plated Inserts 29/32"

Most craft stores have them in the candle section.

• ▶ Reply

Permalink Reply by uncle Lou on May 31, 2010 at 5:37pm

I myself use pvc washers, I think there a washer. there alot like the grommets but plastic so i paint them what ever color and glue em in. I get `em for 25 cents a piece

• ▶ Reply

Permalink Reply by Ben "C. B. Gitty" Baker on September 30, 2010 at 4:43am

Hello all, I have been adding more varieties of larger curtain grommets in my shop. Have several sizes in brass, copper and nickel, and just ordered a 1.5" nickel variety today. I also have smaller standard grommets, and those brass candle cup grommets that are in the photo above. Check out my site: http://www.cbgitty.com/cubecart/index.php?act=viewCat&catId=26

• ▶ Reply

Permalink Reply by Dave Onastik on September 30, 2010 at 5:33am

I purchased some of these from you CBGitty. They work great, plus the price was good, and it's always convenient and easy making a purchase from your site.

C. B. Gitty (Ben) said:

Hello all, I have been adding more varieties of larger curtain grommets in my shop. Have several sizes in brass, copper and nickel, and just ordered a 1.5" nickel variety today. I also have smaller standard grommets, and those brass candle cup grommets that are in the photo above. Check out my site: http://www.cbgitty.com/cubecart/index.php?act=viewCat&catId=26

• ▶ Reply

Permalink Reply by Reverend Hellgood on September 30, 2010 at 11:01am

+1 on C.B. Gitty. I dealt with them on thier ebay store, and they shipped my grommets out super quick.

• ▶ Reply