Has anybody tried cutting pickup? I have an under the bridge strip style pickup I would like to cut for a 3 string resonator.Will it still work if I cut it?

Views: 281

Reply to This

Replies to This Discussion

I am going to say no, it would not work....looks a bit fancy for something like that....but I could be wrong. What I am thinking is as soon as you cut it, it will cut the wires inside, and short out the pup....but again...could be wrong.
Here is a little more information on the construction of these types of pickups.
Piezo/CoaxTransducer

In general, it is possible to trim these to size. I suggest taking it a layer at a time with a very sharp razor knife. These pickups themselves are pretty strait forward in build, As long as you use a needed preamp, which you already have, you should be ok.

If this is an expensive pickup and you want to try this experiment on something cheaper, I have seen the piezo elements themselves for 10-12 bucks on Ebay.
yep, u can cut it and it will work...
the real question is are you surgeon enough with the solder iron to make one from the other half??
second half will work too if u can make the circuit..
the discs can be cut into as many pieces as u can solder too and still work
The pre-amp and piezo element sold on e-bay for 5.99 so I bought 5 of these. I have used two already, but I did not cut the element down on those.
I bought a reso cone from Lowe and I would like to not cover up more of the cone than I have to. That is the reason I would like to try and trim the element down.

Don Goguen said:
Here is a little more information on the construction of these types of pickups.
Piezo/CoaxTransducer

In general, it is possible to trim these to size. I suggest taking it a layer at a time with a very sharp razor knife. These pickups themselves are pretty strait forward in build, As long as you use a needed preamp, which you already have, you should be ok.

If this is an expensive pickup and you want to try this experiment on something cheaper, I have seen the piezo elements themselves for 10-12 bucks on Ebay.
Mark, Mike Lowe has a trick to piezo his cones. It involves using a buzzer disc rather than a ribbon one.. I'm not at liberty to divulge but ask him nicely, its worth it i promise ;)
I tried a piezo disc between two pieces of walnut. I figured that would be the easiest way to do it, but the ribbon transducer has a much fuller sound to it. I will ask him though,he may have a better way to do it than I tried. Thanks for the help
Would you mind sharing the seller's name? I might be interested in pickup up a few myself for some upcoming projects.

Mark Lillo said:
The pre-amp and piezo element sold on e-bay for 5.99 so I bought 5 of these. I have used two already, but I did not cut the element down on those.
I bought a reso cone from Lowe and I would like to not cover up more of the cone than I have to. That is the reason I would like to try and trim the element down.

Don Goguen said:
Here is a little more information on the construction of these types of pickups.
Piezo/CoaxTransducer

In general, it is possible to trim these to size. I suggest taking it a layer at a time with a very sharp razor knife. These pickups themselves are pretty strait forward in build, As long as you use a needed preamp, which you already have, you should be ok.

If this is an expensive pickup and you want to try this experiment on something cheaper, I have seen the piezo elements themselves for 10-12 bucks on Ebay.
That's the exact same preamp in my "Salvador Ibanez" classical.
/body>
mate buzzers are only a couple dollars and a switch a couple more, if Mike give u his secret do both ;)

Mark Lillo said:
I tried a piezo disc between two pieces of walnut. I figured that would be the easiest way to do it, but the ribbon transducer has a much fuller sound to it. I will ask him though,he may have a better way to do it than I tried. Thanks for the help

+ strongly suggest the difference is the preamp not the shape of the piezo element, i'd do both and a switch befre preamp so u can compare the two, cost u next to nothing..

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
34 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
1 hour ago
A.D.EKER commented on Ricky D's photo
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->