so I having finished my first licence plate build I am now moving onto my first oil can build using an engine/motor oil can.  this is going to be a trial run before I work on one for a very patient and understanding customer.  he would like me to use part from a broken 6 string electric of his including the humbucker pickups.  my first two questions.  

I know to access the inside the best way is to cut the bottom off the can how is it best to reattach this? I currently have in mind to then make a frame around the inside to attach the bottom back on.

are there any electronic issues I should be aware of when trying to fit two pickups inside? this I fear is going to be the hardest part due to low access from only one angle.

Views: 448

Reply to This

Replies to This Discussion

Brilliant!

Why not Dremel out the opening for the neck, cross cut an X and peel it open.  When you go bend it back, you can put a metal tab on the inside that's threaded or use sheet metal screws to hold the X closed...

thanks for the advice so far guys I will let you know how it goes.  life got a bit hectic round here recently, only manage to get as far as glueing the neck and fretboard and planing it down after at the moment.  haven't done more than mark out the can yet!

ok guys been quite a while.  I have ended up building both since I last posted! the red one was a 'rough and ready' practice without any pickup so i had minimal cutting.  the second I removed the base completely, glued in a timber frame and screwed it back on.  doesn't add too much weight and I am pleased with the result I hope the customer will be too!

Attachments:

no it came like that.  was such a nice can that i didn't want to cut into it!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods 11 hours ago. 7 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Crazed Fandango added a discussion to the group Introduce Yourself!
Thumbnail

Better late than never...

After joining this forum in 2014, I finally have my 1st CBG which my wife bought for me at the…See More
1 hour ago
Bernie Edwards liked J. D. Woods's photo
1 hour ago
Crazed Fandango joined Cigar Box Nation's group
Thumbnail

Introduce Yourself!

We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to…See More
1 hour ago
Crazed Fandango liked Nomad Jack's discussion Busking Songs...
1 hour ago
Fantacone Box Works commented on Dar Stellabotta's video
3 hours ago
Fantacone Box Works commented on Ghostbuttons's photo
Thumbnail

Four projects

"Very nice"
3 hours ago
Dar Stellabotta posted a video

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

In this video I compare the three different wooden slides made by David Bell and Phil Young up against my Dunlop glass slide! I gotta say these wooden slides...
4 hours ago
Fantacone Box Works posted a status
"Thanks Brian. We'll that's mighty exclusive."
4 hours ago
Ghostbuttons commented on Ghostbuttons's photo
Thumbnail

IMG_2850

"Four recent projects. All 23 inch GDG. From left (bottom): 1.  20 years ago I worked for the…"
4 hours ago
Ghostbuttons posted a photo
5 hours ago
BrianQ. commented on Fantacone Box Works's status
"The know for a fact that the only way to participate is to join the FB group? I believe they do it…"
5 hours ago
Fantacone Box Works posted a status
"Hi, anyone have info on the CBG Swap Off. I stay away from Facebook. Mike"
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->