I am having trouble with round fret markers. 
When I drill the circle the wood tears out and ruins the fret board.  I am replacing one now because of this.  A round punch would be ideal if there is such a thing.  Any advise?

Views: 1833

Replies to This Discussion

I like big dots, so I use  a 3/8" forstner bit to make my dot holes - though 1/4" is probably closer to the norm.  I make the dots with 3/8" and 1/4" plug cutters.

Yes, I was using regular drill bits. Thanks, the forstner bits seem to leave a clean hole for the dots.  I tried it on my old fingerboard and it worked well. I was about to give up on dots, but they are so much better with the forstner bits, that I will continue to use them.

drilling marker holes.

Dots.

Nice.  Where did u get your plug cutter?  jh

I think I got both the plug cutter and forstner bit at Home Depot. But you can easily find then elsewhere too.

http://www.amazon.com/Irwin-Tools-43906-Plug-Cutter/dp/B0002UKVC0

Good replies by all!

For smaller holes, you might try a quality brad-point drill bit for similar results.

Another option for marker material is common plastic rod in lengths of white or black, available from luthier suppliers.

Common twist drills are generally a poor choice for use in wood. I generally only use them for things like small screw holes or starter holes where the tear out or rough edge will be covered or hidden.

Regards,

Mark

Never thought of the plastic rods.  Who has them and what size are available.  I was going to try the abalone shell  5 mm size but the plastic rod sounds like a good possibility.  Thanks for the idea, Mark

I know StewMac sells the small ones for side dot markers.  I have not tried it myself, but I know that people have used plastic chopsticks for the fboard dots. The ones from PF Chang's are supposed to be particularly good. Another option is to punch some dots out of guitar picks. You can get some cool patterns in tortoise shell, pearloid, etc. that way.

That too is a good idea, what do you use for a punch?

Just a regular paper hole punch from an office supply store. Thin picks are easiest, but you can punch through a medium pick if you've got a strong grip. I agree with MBliss; side fret position markers are probably more important than the fret board dots. Unless you are playing a lap, the side of the neck is usually the part you are looking at while playing. 

On my builds, I just drill shallow holes in the side of the fboard and fill them with either white or dark-tinted wood filler, then sand them flush. Super quick & easy.

I'll try that, a paper punch.  Wood filler another possibility.  Thanks.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Adhesive Removal

Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12, 2022. 9 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fantacone Box Works Mar 12, 2022. 7 Replies

scarf joint

Started by PattJ. Last reply by Fantacone Box Works Mar 12, 2022. 2 Replies

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11, 2022. 4 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 15, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 19, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
4 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
5 hours ago
BrianQ. commented on Dar Stellabotta's video
9 hours ago
BrianQ. liked Dar Stellabotta's video
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
11 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
13 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
13 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
15 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
15 hours ago
A.D.EKER commented on Ricky D's photo
15 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->