I just finished 3 CB Ukes and of course the necks took most of the efforts. I have ideas in my head for a jig to expidite the process of shaping the necks.
I began with a piece of 2" x 8" x 6' Sapele cut down for the neck and head stock. The 2 pieces are mitered and glued for the head stock angle. From there I hand shape the necks and head stock with drum sanders. I then slotted the Bolivian Rosewood fret boards on a jig I made. After gluing the fretboard to the neck, I drill the peg head and finish sand the whole thing to 320. Next comes medium jumbo frets and Pearloid dots from Stew Mac followed by a leveling, crowning and tang cleanup. The finish prep includes several cycles of Crystalac grain filler and 400 grit sanding. The head stock receives a couple of water slide decals (Testors) printed on the home PC and sprayed with shelac. I apply 8-10 coats of Behlen Nitrocellulose Lacquer then wet sand/micro mesh to 12,000 before polishing with 3M Finess it and Perfect it.
As you can imagine, it is not a quick process and I started these builds last year. Just from the experience I am gaining and the jigs I have now built, I am sure I can cut my time in half. I am also considering some low end builds with simple necks that can be turned around in a day or two.
Please tell me about your experiences, process and build times?
Tags:
I buy 1x2x48" stock hardwood. (it gives just enough to build my necks, including my neck brace and heal) I first add wings for my head stocks, then cut its shape I want. Then I remove the access wood from the head stock, just enough for the tuners to fit properly. Now I can shape my neck with a rasp and file to what I want, All this takes me about an hour including the finish. Just a note, I don't use scarf joints...so it automatically knocks of some time.
Neck cut and glued up pretty much like you are doing but I use coarse to fine rasps to get the neck shape where I want it. Stuff happens too fast for me to use drum sanders and I hate all the dust. Finish sanded and then if I have to fill grain I use epoxy with this filler that is kinda like dust, don't remember the brand but on mahogany or sapele I use some mahogany filler I get from LMI. Fretboards get slotted on the table saw with templates, dots put in place, fretted and glued on. Maple gets shot as it but every other kind of fretboard gets taped off and lemon oiled after finish. Sand, vinyl sealer and then Cardinal lacquer. I only go to 2500 with Buflex pads and buff out with Meguiar's polish on a foam pad. Bodies get the same treatment. I've sanded out to infinity with fine papers and in the end couldn't tell the difference from going to the 2500 and stopping or going beyond and then buffing.
So you spray your bodies as well? I wish I had considered that on at least 1 to compare.
I build most of my CBG boxes so I like to shoot em and all my ukes get shot. Mostly I do the necks and bodies separate and put the necks on after. I've really got to like the Cardinal Luthelac lacquer. Great stuff and I think it has a lot more solids in it than some of the others. Dries harder than a politician's heart and takes less coats but I wait maybe a week to 10 days to buff.
I have a very technical and specialized process as you can see in the picture below. I reluctantly share my trade secrets.
I have a very technical and specialized process as you can see in the picture below. I reluctantly share my trade secrets
Funny!! Sometimes simple is best.
And sand, and sand, and sand, Ad Nauseum LOL
I should have flipped 5 and 6 above.
I've given up working on a bench since there are always more than enough crap to take up all the available space. I found that the steady rest of a 2x4 across my lap hardly ever gets cluttered and is adequate for most work. I shape and taper the neck with that hand plane and my calibrated eyes seem to know when to stop.
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango 14 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by BrianQ. 18 hours ago. 2 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Wednesday. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!