Replies to This Discussion

Permalink Reply by Blue Collar Devil on May 14, 2013 at 5:14am

I think it's a great idea. 17" scale should work perfectly for the build.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on May 14, 2013 at 6:02am

Craig,

That oughta work. You could call it the Wee Mandoline.

>:-E

• ▶ Reply

Permalink Reply by the anonymous pick on May 14, 2013 at 6:25am

sounds  great  ..   you  may   want to   keep  balance    in  consideration  if  using  a  heavy    neck like  oak   etc  ..  maybe  even  a counter  weight  in  the    body  to    compensate  if needed  .  it's    not as   easy   for them  to  lift  a   knee  a  bit   or prop  against    the  hip  snug  while  playin  ..  i  doubt  you  would  have    many  issues  like  this  on  a  17  inch  scale   tho  anyway  .  but   it's worth  keeping in  mind .  

  good  luck   ;-)

 

• ▶ Reply

Permalink Reply by Kevin (Voodoo Rat) Hoelting on May 16, 2013 at 2:23pm

Glad you said that. I built twin 3-strings for my two daughters. They are pretty tiny, so the guitars were too. It was like trying to hold onto a flyswatter. I stacked two 6" neck scraps into the bottom of the box. Worked pretty good.

• ▶ Reply

Permalink Reply by Craig Mayhem on May 14, 2013 at 7:59am

Thanks, guys! I thought the dimensions would work, but just need a few extra set of eyes on them. Hadn't thought of the balance issue but that's a good point, Pick! I'll cook something up.

• ▶ Reply

Permalink Reply by Bluesheart on May 23, 2013 at 9:07am

Hey I put a counter weight on a bass I made for my wife using a bolt and  a stack of fender washers that works very well. It could also do double duty as a strap mount or even a jack/strap mount if you use one of the long threaded ones from Gitty?? That thing was bear to hold w/o the weights but now is in perfect balance.

• ▶ Reply

Permalink Reply by Craig Mayhem on May 23, 2013 at 4:49pm

i checked that out. it's a good idea

• ▶ Reply

Permalink Reply by brad creacey on May 25, 2013 at 6:45am

my first build is made from an oak tv tray table leg which is 1 1/8" wide and 3/4" thick.  i used some 1/4" poplar for the fret board. since i can't touch my thumb to my pinky playing a six stringer is quite difficult.  this narrow neck three string cbg works great!  cheap too!

• ▶ Reply

Permalink Reply by David McQueen on May 26, 2013 at 8:05am

I had a though on the frets. With a 17" scale, room is going to be at a premium on the fret board.  You might want to go with Narrow Medium frets for this build. You are kind of getting down to mandolin territory in terms of scale length.

• ▶ Reply