I'd like to discuss a bona fide tone wood source here.
and the logistics involved in gathering it for recycling into newly built instruments.
I gathered a couple pallets, just the other day, that had some mahogany and boxwood... but darn it! there's just too many nails holding them things together, and they destroy a bunch of the decent runs of wood that could be used for necks and such.
So I'm working on a new source!
This morning I responded to a craigslist ad for a freebie piano that is apparently nearby.
Don't yet know if I can prevail, but it will be interesting, in a number of ways...
First thing abt a piano is the bloomin' thangs are HEAVY! REAL HEAVY!
and I don't think the party would feel very good if I showed up with my 8lb sledge to make manageable pieces of their family heirloom they no longer use and don't have room for, so they wish to pass it on. :-)
We're talking abt a 100 year old piano here! Of course it's scuffed and scratched, needs to be repaired and tuned, to be playable... but the wood it's built of is some quality level of tonewood and hardwoods that have been aged for many, many years! This has GOT to be a bonus over pallets!
What lengths, and dimensions I am able to salvage will be interesting....
I'll do a follow up post with the results, if it happens....
Included in the package deal will be a whole flock of strings! Great for diddley bows and CBG's!
and zither pegs...
and also the cast iron framework that makes an interesting piece of garden art! lol
and all them celluloid keys which might serve as inlay material???
Has anyone attempted this???
gotta find my 4 wheel coaster dolly thingy... and a helper! lol
Best
rc
Tags:
Sounds like recycling at it best. Interesting to see how it works out. Just don't go chopping it up if it has Steinway or some other famous name on it. Then you might consider turning it for enough money to buy a bunch of wood. :)>
Tnx DS!
Advice I can ALWAYS use!
Many years back I stumbled across that iron framework you mentioned when I pulled off a hwy for a pit stop.
Someone had tossed such a cast iron frame over the edge of the roadway, and there it sat, rusting away, a few feet down the embankment... I thought, What a kool piece of Garden Art!
...and there I was, travelling in a honda car....
It wasn't worth the cost of a trip back after it in my pickup, even back then....
And the last free piano I got was many, many moons ago... just about busted a gut trying to load the thing up!
SO, I'm not so sure this is gonna work, but it was so long ago, I kinda forget how bad it really was, and, like Alfred E. Newman, above, I ain't real brite! lol
I'm gonna try it!
:-)
rc
Well, there's a whole flock of things going on, O99...
2nd on the list is the cosmetic blemish, which indeed could be filled, as you have described.
1st is damage to my saw blades!
Most of my circular sawblades are carbide tipped, and them puppies aren't cheap anymore! Cutting through a hidden nail really dulls them, if it doesn't send one of the carbide teeth zinging across the room. Carbide tends to shatter.
And it's not that I don't pull nails that don't bust off, because they are frequently ring shank, or screw shank nails, that were generally in a wired coil from the gun, which also embeds some of that wire with each nail shot into the wood.
Before my retirement I did renovations on many wonderful homes, even some on the historical register! So I still have about a dozen different nail pulling devices, of varying sorts.
Many of 'em fail when the old rusted ring shank pallet nail, sunk down into the board, snaps off ! Not to mention the air is turned up on the gun, to bury the nail head in the wood, and the shooters are moving quickly, so they take a lot of shots!
Then we've got to consider that pallets themselves are frequently recycled, and repaired, using parts from other pallets, with embedded nails that can't be seen because they are cut off with a sawzall when the other pallets are disassembled! Those hidden nails are tough on the carbide sawblades, and planer blades.
Sound... a significant factor in our musical instrument projects!
...Just recently I was over at the fiddlehangout where a fellow described building a kit fiddle.. He said it came out quite nice looking, for his first attempt at building a violin, but there was a problem with the tone he had difficulty tracking down. Eventually it was determined there was a void in the wood of the neck, which caused the tone of the instrument to be unacceptable, even though it looked quite nice.
Personally, I'm with PK, who once stated that certain blemishes were 'features' of an instrument, and not to be considered shabby. Well, fact of the matter is that they do cause problems with tone of the instrument.
And I would say, even if a nail hole is filled, in the common fashion you have described, the anomaly now forever a part of the grain structure of the wood is probably not conducive for the best tone to be produced.
In my own crude experiments I have discovered that quite a bit of the musical sound generated by a string instrument comes from the neck, itself, so a proper and suitable wood should be selected for that purpose.
...and getting a long enough piece of wood from a pallet is difficult.
Whew!
That reply got long, didn't it!
lol
Best
rc
Ed, if I'm to blame :-) pls let me advise you....
Pianos are really HORRIBLE things to move.
i can't stress that enough.
You, and/or your helpers can be seriously hurt moving these monstrosities!
I only do stuff like this cuz I'm not very smart.
Wheeled dollies and four helpers is what I would advise if you are even thinking abt moving a piano.
....i make most my presentations in a lite-hearted, frivolous manner i think might be entertaining for people to read, BUT, moving pianos is a very serious thing to undertake.
Whew! there's my disclaimer and health warning advisory statement!
(I'm very afraid of some young wife coming after me with vengeance in her heart over a broken husband.)
Best
rc
Been there, done that. Helped a friend move a "free piano" once. "How difficult could it be"? Actually loaded an upright into the bed of a pickup truck. No permanent injuries, but NEVER AGAIN!
By golly that dremel must have been spinning a gazillion r's, too! Whew!
I wear spectacles nowadays... with plastic lenses, but I did lots of work over the years and never wore safety goggles... only caught up with me a few times... but them dremel tools go real fast!
Glad yah made it past that obstacle without getting hurt!
Well, O99, I'd sure like to see pics of the tennis racket dulcimer when you get her up in playing condition!
Sounds like fun!
I looked at tennis rackets a few months back in the thrift store, but them folks have almost doubled their prices recently. Tennis rackets, baseball bats, and even hockey sticks are $4 apiece, now... some even more!
Abt the only deal I can find on a regular basis is cookie tins for a buck and sometimes a cooking pan or ashtray that might make a good resonator, for a buck or so.
It's not like the days gone by when I could drive around on a saturday morning and look for yardsales... cost too much to go motoring around, with no specific destination.
I guess there's a silver lining to it all... this economy thing stays in the tank, I might learn to write blues songs!
Best
rc
Started by Wilda Connell. Last reply by BrianQ. Aug 5, 2020. 1 Reply 0 Likes
Started by BrianQ.. Last reply by Wilda Connell Aug 5, 2020. 7 Replies 5 Likes
Started by BrianQ.. Last reply by Order99 Jun 9, 2020. 3 Replies 2 Likes
Started by Mike. Last reply by Alan Robinson Aug 1, 2017. 8 Replies 0 Likes
Started by Wade. Last reply by Thomas "Duck" Petry Dec 3, 2014. 2 Replies 2 Likes
Started by Wade. Last reply by Wade Jul 9, 2014. 2 Replies 0 Likes
Started by Wade. Last reply by Rob Brighton Jul 2, 2013. 19 Replies 5 Likes
Started by Where's Uranus?. Last reply by Mark Lindsay Jun 4, 2013. 8 Replies 0 Likes
Started by Wade. Last reply by rusty case Feb 11, 2013. 1 Reply 0 Likes
Started by Wade. Last reply by Mark Lindsay Feb 3, 2013. 23 Replies 0 Likes
Started by rusty case. Last reply by rusty case Nov 21, 2012. 13 Replies 1 Like
Started by rusty case. Last reply by rusty case Nov 18, 2012. 6 Replies 0 Likes
Started by Karl G. Siewert. Last reply by rusty case Aug 27, 2012. 4 Replies 0 Likes
Started by Wade. Last reply by rusty case Aug 27, 2012. 2 Replies 3 Likes
Started by Order99. Last reply by Order99 Aug 17, 2012. 4 Replies 2 Likes
Started by Claude. Last reply by Order99 Apr 8, 2012. 10 Replies 0 Likes
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
Posted by billy jones bluez on February 8, 2024 at 4:05pm 0 Comments 0 Likes
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!