This is something I waited way too long to try. I never really had a big problem with frets buzzing, but having all of your frets perfectly level and polished is a wonderful thing.

There are numerous ways to approach this task, and please bear in mind that this way works perfectly with an instrument with a flat fretboard, whereas the technique would be a little different with a radiused neck.

I ordered myself a fret crowning file from eBay. This one was around £25, and came complete with several grades of sandpaper from 800 to 2500 grit, a spring steel fretboard protector (to use while sanding) and a gummy rubber to clean the file. The file itself is concave and fits neatly over an individual fret, it is a diamond file and will give a good and smooth result quickly. They are custom made by a guy in the UK. Link here

To begin with, clamp the guitar down to you bench/table. I used some soft materials to prevent any scratches to the finish. I also masked off the pickups, so I didn't get any metallic dust in there.

Use a felt tip pen to draw a line straight across the tops of all of the frets. I used one of my daughter's Crayolas as they are easy to wipe off in case I slipped. This will be your reference point, as it will highlight any lower frets as you level them.

Levelling - this is the step that would differ if your fretboard had a radius (of course you can buy fret levelling files for this purpose, and I have heard of sticking sandpaper in your radius sanding block and using that). I ran the finer surface of my sharpening stone back and forth across the fretboard a few times, being careful to apply equal pressure. I carried on until all of the pen marks had gone.

Notice the flat tops on the frets. The two on the left side of the photo have had the pen line redrawn on them. Now it is time to recrown them.

With the crowning file, a few passes across the top of the fret will bring back the original rounded top. You want to keep going until your pen mark is just a very thin line across the middle of the fret. One you're happy with it, time to polish them up.

There are two ways to go about polishing the frets after crowning: Do them individually, using the spring steel fretboard protector and progressing through the grits (800, 1000, 1200, 1500, 2000, 2500) on each fret. This took ages! The second time I did this job I simply masked off the entire fretboard (leaving the frets exposed of course) and sanded the whole lot at the same time lengthways. This was much quicker, and I was happier with the result.

Once you're happy with the level of polish on the frets, all that's left to do is to gently brush away any metal filings and dust from the fretboard, and get the strings on. 

And there we have it. Despite having no real issues before, the overall feel of the guitar is greatly improved. Of course, if you are experiencing buzz from uneven frets, this fairly simple process will make a huge difference.

-RK

Views: 4412

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Del Puckett on November 3, 2015 at 8:41am

Beautiful results !!!

Comment by Richey Kay on October 11, 2015 at 6:08pm
No worries Rooster. Just let me know if you have any requests for 'how to's
Comment by Rooster on October 11, 2015 at 6:03pm

Great how-to Richey.....................thanks for posting this ;-)

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
11 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
11 hours ago
Kent Thurston updated their profile
11 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
12 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
12 hours ago
Poorness Studios liked A.D.EKER's video
14 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
17 hours ago
A.D.EKER commented on A.D.EKER's video
20 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
20 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->