Mark Ballard
  • Male
  • Seguin, TX
  • United States
Share on Facebook
Share on Facebook MySpace

Mark Ballard's Friends

  • Dave Nyberg
  • KOOL DOG HOOCH

Mark Ballard's Discussions

Finish on the Box

Started this discussion. Last reply by Kigar Jul 31, 2020. 5 Replies

Wanting to put a finish on this box that will work on the labels too.  Looking for satin not a glossy shine.What do you suggest and should I do it before I build the guitar or after?  Does it matter?Continue

Intonation

Started this discussion. Last reply by Mark Ballard May 11, 2020. 5 Replies

I know that scale length on a guitar is measured from the Edge of the NUT to where the string crossesthe saddle.  When using bolts at NUT and Bridge/Saddle I guess the measurement would be from the…Continue

Finished First

Started this discussion. Last reply by Mark Ballard May 13, 2020. 7 Replies

Well I finished my first a couple of days ago.  Fretless Acoustic.  Learned a lot and getting ready to startmy second.  Sounds good!  On these type of boxes is there a latch or something thatI can…Continue

Drill Bit for CB Gitty 1" Sound Hole Grommets

Started this discussion. Last reply by Grandpa Jan 9. 9 Replies

About done with my first and needing to drill a couple of sound holes in the paper covered cigar box.I have some 1" Grommets/w screens from CB Gitty.  The website site says the inside diameter of the…Continue

 

Mark Ballard's Page

Latest Activity

Grandpa replied to Mark Ballard's discussion Drill Bit for CB Gitty 1" Sound Hole Grommets
"I use a 9/16" spade bit, then superglue the grommet. Be sure to put a backing board behind the lid before drilling the hole to avoid tear-out."
Jan 9
Jerry Jordan replied to Mark Ballard's discussion Drill Bit for CB Gitty 1" Sound Hole Grommets
"I’ve always used a stepped unibit and a little hot glue."
Jan 7
3 String Blues replied to Mark Ballard's discussion Drill Bit for CB Gitty 1" Sound Hole Grommets
"thats a great idea!"
Jan 5
Mel Cooke replied to Mark Ballard's discussion Drill Bit for CB Gitty 1" Sound Hole Grommets
Jan 5
Kigar replied to Mark Ballard's discussion Finish on the Box
Jul 31, 2020
Mark Ballard replied to Mark Ballard's discussion Finish on the Box
"Looks good,  Spray Can or do you have a spray gun system...."
Jul 30, 2020
Southern Ray replied to Mark Ballard's discussion Finish on the Box
" Well-timed post for me, Mark. Thank you for getting it started, as I would like to know the same thing. I haven't put anything on the bodies of my guitars, preferring the worn look. After three years, some are looking about perfect for my…"
Jul 30, 2020
Kigar replied to Mark Ballard's discussion Finish on the Box
Jul 29, 2020
BrianQ. replied to Mark Ballard's discussion Finish on the Box
"Make all your cuts & drill all your holes first, so you can get all the sanding out of the way. Otherwise, you’ll have to do touch ups on the finish if you do it first? As for Finish, just don’t buy anything cheap? Varathane, MinWax,…"
Jul 29, 2020
Mark Ballard posted a discussion

Finish on the Box

Wanting to put a finish on this box that will work on the labels too.  Looking for satin not a glossy shine.What do you suggest and should I do it before I build the guitar or after?  Does it matter?See More
Jul 28, 2020
Mark Ballard replied to Nick Burchett's discussion Question about CBG tools
"+1 on table saw and laminate trimmer"
May 13, 2020
Mark Ballard replied to Mark Ballard's discussion Finished First
"Timothy those are pretty sporty looking. Would look great on a box! On latching down the top. I had some maple veneer that I thinned down and used as shims for the small gap between the neck and the box. Stained them to match the stain I used on the…"
May 13, 2020
T-Gripped liked Mark Ballard's discussion Finished First
May 13, 2020
Timothy Hunter replied to Mark Ballard's discussion Finished First
"The Missus got these for me to hold down and decorate the corners. not sure where she got them she does a lot of scrap booking etc and probably cant rmemeber herself..lol"
May 13, 2020
Mark Ballard replied to Mark Ballard's discussion Finished First
"Timothy, I followed the Gitty Basic Plan (Glenn Watts) and that's the way it's setup on bridge placement based on 31" of neck material length. Realize it's not ideal and the bridge should be moved towards the center of box. Just…"
May 12, 2020
BrianQ. replied to Mark Ballard's discussion Finished First
"Either gluing it down or screwing it down is the best, a loose lid bring unwanted buzz?"
May 12, 2020

Profile Information

How did you learn about Cigar Box Nation?
Web Search for “Cigar Box Guitar Forum”
How many instruments have you built so far?
4 Acoustic Guitars, 2 Tenor Ukulels and no CBG’s (YET!)
What do you find most interesting about cigar box guitars? (If you do not enter something meaningful here, your membership may be rejected).
The Mojo of playing slide in an open tuning on a 3 or 4 string roots instrument. Nothing like the gritty sound

Comment Wall

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

  • No comments yet!
 
 
 

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Your take on this bizarre guitar

Started by Infirmity Citrus President in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans 1 hour ago. 8 Replies

Guitar Amp

Started by Chase N Williams in Building Secrets, Tips, Advice, Discussion. Last reply by Paul Craig Sep 21. 5 Replies

Blog Posts

Let’s talk Aeolian…

Posted by BrianQ. on August 27, 2022 at 12:05am 0 Comments

Building a Violin w/ GITTY Parts

Posted by Brad Craig on August 11, 2022 at 6:39pm 3 Comments

Effects Pedals

Posted by Trey Allensworth on May 26, 2022 at 10:04am 12 Comments

Latest Activity

Bernie Edwards liked Randy S. Bretz's photo
44 minutes ago
Taffy Evans replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"Hi, yes I've seen them before Brian. With a box made for three necks, it's no big deal,…"
1 hour ago
BrianQ. replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"3 necker is doable? https://youtu.be/iAiLIbSh0gI"
2 hours ago
Taffy Evans replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"Hi, a three-neck instrument sounds interesting. I think it would be a better deal to build an…"
6 hours ago
BrianQ. commented on Papa D's photo
Thumbnail

camacho3

"Those boxes are mighty thick!"
7 hours ago
BrianQ. liked Randy S. Bretz's photo
7 hours ago
BrianQ. commented on BUGGY (C)'s video
Thumbnail

Swampy Resurrection - (The Journey)

"Been too long, I missed your vids buggy!!!"
7 hours ago
BrianQ. liked BUGGY (C)'s video
7 hours ago
AGP # liked Randy S. Bretz's photo
10 hours ago
AGP # liked BUGGY (C)'s video
10 hours ago
Randy S. Bretz posted a photo

Just the coverplate and strings yet!

Had to replace the piezo cable with a piezo rod. Bad cable!
10 hours ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"I was thinking, buy it, add two necks, tune one each EBE, DAD, and DGD. This is Soviet era, so not…"
10 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->