I’m trying to make a guitar that I can play by removing the frets epic Ying the fretboard and then just sliding up and down the strings, I’ve got some experience making Diddley bows but I’m unsure of…Continue
Hi guys, I’ve never built an amp before but I’m going to try and have a go of it in the coming months, I don’t know anything about speaker cones, apart from the difference between pressed and non…Continue
"Hi Ozz989, I was right your comments did refer to a band and as promised I had a listen to it. 30 seconds was enough for me haha, but forced it to a minute.
On the track I listened to the rhythm section you mentioned to my ears was mainly drums, and…"
"Hi, I think going it alone on a project that's a sort of experiment that only you know what the final outcome should be is the way to go. A number of your descriptions or terminology used were a bit misleading.
1 - Metal Sound - Use a tin box…"
"Ok then, I’ll give you some parting advice for your future neck deconstruction
Only use Pliers like these to pull frets-they will allow a clean job & won’t cause irreparable damage? You can find the smaller ones in the pic at…"
"There are several way's to go about that, build a four string lap slide ,whit your bridge base a tin or something metal preverably a cigartin ,a monster pickup , string tuners, tone control , volume, truckload of FUZZ Distortion,…"
"I have seen them live quite a few times , so I’ll tell you what I think. Firstly, they all play in drop tuning(drop B) B,f#,b,e,g#c#, which gives them that ominous sound? 3 big strings are tuned same as open tuning, so drone sliding around is…"
"So basically, I wanna take a guitar, or bass depending on what we think an appropriate scale length would be for the correct ish sound, but bassically just go listen to back to the primitive by soul fly and try and pick out the rhythm section with…"
"I`m trying to decipher your question but I gather you want to take the frets of a guitar to make it into a fretless guitar? Well, if you do have an old guitar you don`t care for then stripping the frets off it will do exactly what you want. You just…"
I’m trying to make a guitar that I can play by removing the frets epic Ying the fretboard and then just sliding up and down the strings, I’ve got some experience making Diddley bows but I’m unsure of exactly what I need to do in order to get somthing that has a metal sound, if anyone has tried this I would like advice to avoid breaking my budget messing things up
"Ozz, a friend of mine told me that they’ve replaced the Celestions with Eminence speakers in the Bass amps, so that’s probably what you have, here’s some info on specs, but imho I think it’s way easier buying a used speaker…"
"Ok, so what I’ve done is taken the controls out of a line 6 spider 2 and I just wanna connect it to a speaker cone similar to the one in my orange crush 100 bass amp, but the only specs I can find on the cone is that it’s a 100 watt…"