Photos

Comments

• 

  Skull Box Mojo March 5, 2010 at 2:59am

  It seems to work well... the tension is high but I screwed and used wood glue at the end and until now I have no probs... it stays well in tune and you need a svrew driver to tune it.. .this is a little bit tricky but it works well
• 

  flatfoot johnny March 3, 2010 at 3:40am

  Yep, thats pretty cool. Whats to stop the end peice (which the screws are drilled into) from snapping off? There must be a lot of tension on it.
• 

  HENRY LOWMAN February 27, 2010 at 11:07pm

  YEAAAAAAAHHHHHHHHHHHH!!!
• 

  Christopher Call February 27, 2010 at 10:44pm

  WOW is all I have to say! You should work for NASA! LOL That is a GREAT invent there!
• 

  dg February 27, 2010 at 8:40pm

  cool...took me a minute to figure out how that works, I definatley would have never thought of it
• 

  Fergus Morris February 27, 2010 at 7:19pm

  That is really clever!
• 

  Skull Box Mojo February 27, 2010 at 12:36pm

  Thanks a lot ;-)
  I developed another one... which is even better I think. I will upload pics later.
  There is no tube in the wood but it is not really critical. But I have to admit that the closer the nut comes to the end it is harder to screw it up but my new design solved that problem... I also think it is not necessary to cut the wing nut... next time I just will cut out a piece of the neck and put the screws through it... that's much easier and should also work well... will upload my new design later.
• 

  Shawn February 27, 2010 at 12:14pm

  Is there a tube inside the wood to keep it from warring out the wood?
• 

  Shawn February 27, 2010 at 12:12pm

  That's really a great idea you have there.