Comment

Comment by Chuck H. on October 28, 2021 at 1:59pm

Thanks Bob looking close at it there are rough spots. Brian Q sent a link to a video on how to do it with a glass cutter and hot & cold water. I'm going to try that next time .

Comment by Bob "Ambrose" Negus on October 28, 2021 at 10:17am

Nice one.  I used a dremel tool to make my first bottleneck.  You've done a better job than me.

Comment by Chuck H. on October 27, 2021 at 8:19am

Thanks Brian, I'll try that next time

Comment by BrianQ. on October 27, 2021 at 7:34am

Easy peasy:

https://youtu.be/zQxQqR70CVw

Comment by Uncle John on October 27, 2021 at 4:33am

Thanks, Chuck.   

Comment by Chuck H. on October 27, 2021 at 4:10am

I used a Dremel tool with a regular cutoff wheel and went around and around, it took a long time to cut, and it came out a bit rough. I smoothed it out on a belt sander then a buffing wheel, I think it needs more buffing.I put some foam inside to make it fit snug. buffing.

Comment by Uncle John on October 27, 2021 at 3:27am

Nice slide and git. How did you cut the slide? My easiest and pretty good home made slides are to get a copper pipe, cut to length and polish a bit with steel wool.

Comment by Jerry Jordan on October 26, 2021 at 10:29pm

Nice, that’s what we do. Looks like great fun