Photos

Comments

• 

  Dave Onastik February 11, 2010 at 11:00am

  Yes I did Wes. Those are cool boxes. Look forward to see what you do with them.
• 

  Wes "I'm Baaaaack" Yates February 11, 2010 at 10:27am

  Plus I have 5 of the same type boxes. You put the plastic coated label on the outside right?
• 

  Wes "I'm Baaaaack" Yates February 11, 2010 at 10:26am

  Loven' the laminated neck.
• 

  Dave Onastik February 10, 2010 at 1:05pm

  I'll give that a try. I think the main thing is the speaker can only take so much output from the amp. I have an oval shaped speaker that is a little larger than the one show, and that would probably work better, but I would need a bigger box.
• 

  Michael Gajeski February 10, 2010 at 12:44pm

  You could try isolating the speaker from the box so it doesn't vibrate the top any more than it has to. maybe a bushing made from neoprene or something like that.
• 

  Dave Onastik February 10, 2010 at 12:22pm

  I used the SDA-P from Guitarfuel.com: http://guitarfuel.com/SDAP_SDAT_SDANS.php
  
  Yes, there is feedback if I turn the volume up over a certain point, about half way on the scale. I suspect this is due to the size of the speaker, and possibly in part because I used a piezo pickup. Next build, I may add an extra speaker in parallel and use a magnetic pickup.
• 

  Michael Gajeski February 10, 2010 at 10:38am

  What amp kit did you use? Do you get much feedback with the speaker in the box.