New strummer in process. I decided to try making it with the neck and body in one piece. As you can see, it is working. I glued the neck up and cut the back angle and the angle for the peg head, then spread the sides apart and installed the back of the body. I did cut the center part too short and had to shim it up. So not technically one piece, but you get the idea. I would normally install a piezo and a set of in line tuners into this type of build to keep the cost down. I am out of both right now, so I am going to try to fit a single coil in and use some enclosed tuners. This looks like it will be a much faster and easier way to build and will also give it a more seamless look.
You need to be a member of Cigar Box Nation to add comments!
Join Cigar Box Nation