AGP #523 – “Clean Machine”
3 String Fretless Guitar
Scale : 648mm / 25½ inches
Strings : .046NW / .030NW / .021NW /
Tuned: G D g
A bit of a change from my usual Recycled Timber Builds, this one is Hardware Store Purchased Timber from a couple of years back, must have been On Special.
The Box Body is 12mm Radiata Pine Lining Boards, and the Neck is 42mm x 19mm Radiata Pine, all Timber is coated with a Golden Teak Stain, and finished with 3 coats of my Sam Maloof Poly/Oil Mix and 1 Coat of Paste Wax.
This Build Originally had a 7.4 Chrome Humbucker Ghosted under a Pomade Tin Lid, and despite doing a very similar Build a few years back, which worked fine, this one Squealed and Squawked so much, I had to modify it to its present state.
A 5.7k Teisco Type Clip On Single Coil Gold Foil Pickup is wired through 500k Vol & Tone Pots to the Output Jack. :-)

Views: 40

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by AGP # on February 24, 2024 at 11:51am

Thanks BQ", my first suspicions were the Metal Covered Pup interacting with the Tin Lid, you would think I would know better, after several unsuccessful attempts at Ghosting Humbuckers under Tin Number Plates etc over the years, I'm pretty sure the Humbucker I Ghosted in Build #311 was like the one in this Pic, I did try the same type in #523, no feedback noises, but it did sound very Tinny, so I opted for the Unghosted Single Coil instead :-)

Comment by BrianQ. on February 23, 2024 at 12:59pm

Covering a metal covered pickup with more metal will give unwanted eddy currents? I would’ve taken the cover off or used pick guard material to ghost under. The extra metal traps the magnetic current from spreading outward, sending it back at itself, creating a loop? Wax would do those cheap pups some good too? 

Comment by AGP # on February 23, 2024 at 11:55am

"Thanks A.D.", Yep!, sometimes things don't go quite as planned, but there's nearly always a solution to most problems, and fortunately I didn't have to dig too deep into my Wallett, the Hardware Store Pine only cost me $8.16AUD ;-D   

Comment by AGP # on February 23, 2024 at 11:49am

"Thanks UJ", the Round Soundhole was the result of the failed Ghosted Pomade Tin effort, and the two side Soundholes are one my Faves, and Yes!, a change of Pups cured the Squealy Squawks Problem, was originally going to use a Dark Oak Type Stain, but went with a lighter one to highlight the Pyrography Border, I've foud that I get my best Pics when its overcast, or the Sun has just down, or before it just comes up, and find my nostalgic old Australian Navy Flag suits the Pic of the Git better than the dark painted bench I use.  :-)

Comment by AGP # on February 23, 2024 at 11:36am

"Yes BQ", Horrible Feedback Noises when using the Distorted Amp Settings, and a very Tinny Unpleasant Sound when using the Clean Amp Settings, done a similar Ghosted Humbucker under a Pomade Tin Lid Build some time back, with no such problems. :-)

Comment by A.D.EKER on February 23, 2024 at 4:21am

Sometime's a plan comes together nicely ! and your right usaly electronics leaves you hanging and as you know there are allway's other solutions AGP#  ,and you been digging in the Wallet again ! but all and all this one comes out real sunny and Go Get Go ! nicely done Alan !

Comment by Uncle John on February 23, 2024 at 1:59am

I like the sound hole and pickup and the wood tone too.  You do a great  job on your photography and using the flags.  Sounds like you got the squeals and squawks worked out?

Comment by BrianQ. on February 22, 2024 at 6:32pm

Squealed & squawked? As in feedback? 

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

BrianQ. commented on Glenn Kaiser's photo
Thumbnail

Less Paul by GK

"Lots of fun!!"
24 minutes ago
BrianQ. commented on Glenn Kaiser's photo
Thumbnail

My New Less Paul

"Diddley Paul :) "
25 minutes ago
BrianQ. liked Glenn Kaiser's photo
25 minutes ago
Glenn Kaiser posted photos
5 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Glad to put a smile on your face BrianQ! This one is a fun one to sing and play."
5 hours ago
BrianQ. liked Doug Thorsvik's video
5 hours ago
BrianQ. commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Another great oldie I thought I’d never hear on cbg!! :)"
5 hours ago
Doug Thorsvik posted a video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
9 hours ago
Matthias Bichsel left a comment for Moritz Voegeli
"www.cbguitars.ch auf FB This Bichsel"
yesterday
Matthias Bichsel left a comment for Moritz Voegeli
"Hallo, ich bin aus Solothurn. Lisa Stearns hat mich gefragt ob ich Dich kenne. Ich baue cbg. Gruss…"
yesterday
Matthias Bichsel liked Moritz Voegeli's profile
yesterday
BrianQ. left a comment for John Herrick
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->