I'm in the process of acquiring bits for my first build and am struggling to find local suppliers of PSE hardwood timber for a neck.

pine is plentiful and cheap, but I dont know if I trust it.

a local yard can supply a length of Brazilian Redwood, but I would then need to get it planed down to size and its £20 before I do that, although I reckon I'd get three necks out of it. was just hoping for something that I could buy off the shelf though to be honest.

what do you all do?



Views: 866

Replies to This Discussion

just realised there's another thread on page 2!

still learning my way around the site! 

I'm in Helensburgh, Scotland, if anyone on here lives that far North :-) 

Old junk furniture is good..
You need to know your woods
And sometimes need to laminate it
You would be amazed what gets chucked away
Mahogany and Ash is nice..

Bug's right about reclaimed timber,never pass a skip without investigating,it is amazing what gets thrown out.

For new timber try Feuillus Fencing,I've had oak,lime,wenge,sapele and walnut from them

I used an old mahogany doorstep. Took it from a window fitting company's skip. cut it down with a hand saw. Got 3 necks out of it and had some small bits left over for bracing or making a nut etc. Mahogany is strong but qiite easy to shape. Oak is used quite a lot on furniture as Bug said. Especially on sofa arms.Harder to work with but very strong and a nice light colour. Jewsons etc sell hardwood stair parts if you want to buy new. Homebase sell dowels and strips of mahogany suitable for making fretboards. i use lighter dowels for the marker dots.

Hi Jim

I can provide you all your timber needs

I can machine the wood to the required thickness and lengths

I have in stock

Mahogany , Brazilian mahogany, Oak , Wenge , Cherry , Walnut , Maple and beech . plus all availiable in

Fingerboard lengths .

I have a massive stock of all the above

Please let me know your requirements and I can give you prices .

My building website is www.justplaytheblues.co.uk



When I first started making CBGs I recycled an old oak fire place surround. worked really well.

When that ran out I paniced a little, none of the DIY stores had anything but pine - avoid and stick with hard wood IMO.

Since I have used a local branch of Arnold Lavey for end of line runs, however these tend to be on the thin side, approx 18mm which is the thinnest I can really work with for a neck, and then only really for piezos as a pickup will require a recess that cuts the neck down too thin.

My best source has been to find a local friendly saw mill, the wood generally comes planked at 1 inch which easily accommodates the recess for a pickup, and is a lot cheaper than DIY stores.

As mentioned, recycled furniture is a really good source.


I was looking forward to visiting John Boddy's in Boroughbridge when I was in Yorkshire recently only to find it's closed and the land's been sold for housing. That was an Aladdin's cave for timber of all kinds, but.....

I found out that a lot of their staff had gone toDuffield Timber near Ripon, so visited them. It's a very upmarket company, but they do have offcuts. I bought a really nice piece of Maple - easily enough for 4 necks for a tenner, and 2 pieces of oak 120 * 6 * 1800mm for £2 each - gotta be great for fingerboards.

That bit of the business is run by a guy called Arti, who couldn't have been more helpful. It's a couple of hours drive for me, but it's now No. 1 on my list.


I would consider two table legs glued together along their length. Get to the local recycling centre and they will have various hard woods in their skip. They just look like table legs and furniture pieces. Plane them yourself by hand, it's does not take long.

well, I havent had time to get to the tip yet, probably wont till friday.

as a back up plan, I've found a local timber yard (rembrandts) that sells 2.1m lengths of American White Oak for 8 quid. Its DAR (dressed all round, I had to google it lol) and 20mm x 45mm, so I might go and have a look at that too. its got to be worth a look if I can make two necks out of it :-) 

Jim, that oak sounds like a fair deal..it makes up into a decent neck (I've got 2 oak necks on the go at the moment) but it is damned hard stuff to work, especially with hand tools, so your tools need to be kept razor sharp. By the way, a decent woodyard will cut and plane the stuff to size for you - my local place does it for free, even on small orders...just try asking.

Yes, we poor Brits don't have the luxury of Lumber yards that stock every wood known to man.

That said I have found White oak (2x1") in Ridgeons as well as Eucalyptus (Grandis) in Ridgeons and Travis Perkins. Also, Wickes do stair rail parts in Hemlock. I made a nice diddley from a hemlock 32mm sq spindle. http://www.wickes.co.uk/Products/Decorating+Interiors/Stairparts/Sp...

You can also use the 12mm thick "dark hardwood" strip that Homebase sell. Its actually sapele and is made by Richard Burbidge. Too thin as it stands but is great when laminated or used as a fretboard on some other wood.

As others have said - keep an eye out for reclaimed wood. A good mate of mine has just given me several planks of mahogany 3/4" thick. His church was doing a refurb and this was the old lectern.

Good hunting

B&Q now have oak  board for their rustic shelving.

1 piece which enough to get 10 or 11 pieces  for £21.

if they don't have it in stock they will order it for you.

ebay is a good source for hard wood  I got all mine from there inc black walnut.

bought some rough cut very cheap  £12 inc shipping.

I got about 30 fret boards out of them.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Discussion Forum

Small box woes?

Started by Sleepy John. Last reply by Jock MacHinery Jun 15, 2020. 12 Replies


Started by David Tarry. Last reply by David Bowes May 11, 2020. 7 Replies

FX rigs and recommendations

Started by Alex Rigby Mar 25, 2019. 0 Replies

London One Man Band festival with Hollowbelly

Started by Blind Boy Fullers. Last reply by Blind Boy Fullers Mar 20, 2019. 4 Replies

Best Amp

Started by Seasick Mick. Last reply by Seasick Mick Mar 13, 2019. 18 Replies

Looking to play some festivals next year

Started by Alex Rigby. Last reply by Alex Rigby Jan 13, 2019. 3 Replies

New Site goes live!!

Started by John Pilling. Last reply by t-belly johnson Oct 30, 2018. 14 Replies

Demise of Gibson

Started by Sleepy John. Last reply by Sleepy John May 3, 2018. 3 Replies

boxes for sale

Started by Rick D. Last reply by Tony Dec 14, 2017. 5 Replies

My latest build - hubcap resonator

Started by Alex Rigby. Last reply by Slow Blues Dani & Ol' Grey Bear Oct 10, 2017. 4 Replies


Started by Steve. Last reply by Steve Sep 13, 2017. 2 Replies

Some of my songs

Started by Alex Rigby. Last reply by Alex Rigby Jun 7, 2017. 2 Replies

School project

Started by Keith 66. Last reply by Michael Fred Johnson Feb 5, 2017. 8 Replies

Old Timers

Started by Mal Chilvers. Last reply by David L. Oct 13, 2016. 2 Replies

Looking to get started

Started by Hubert Knight. Last reply by Hubert Knight Oct 11, 2016. 6 Replies

I Could Really Do With A Jig !

Started by Philip Hale. Last reply by Philip Hale Aug 5, 2016. 19 Replies

Help with parts please

Started by Toofy Peg. Last reply by Fomhorach Jun 14, 2016. 19 Replies

Brass Eyelets - big ones - where to get?

Started by Alex Rigby. Last reply by Fomhorach Apr 27, 2016. 16 Replies

Blog Posts

My first CBG from Captain Nemoff.

Posted by Vlad on November 29, 2023 at 3:41am 0 Comments

New Album 2023

Posted by Gary O'slide on November 5, 2023 at 2:41am 0 Comments

Spammer Alert, Beware!!!

Posted by BrianQ. on September 11, 2023 at 6:30am 1 Comment

Latest Activity

Doug Thorsvik posted a photo

CBG Snowflake Ornament

Christmas gifts for the local Slingers that show up at the library this Saturday!
12 minutes ago
Chance left a comment for Doug Thorsvik
"I should have mentioned string tree's, in that, if you utilize them careful consideration of…"
40 minutes ago
Chance left a comment for Doug Thorsvik
"HiGreeting Doug, Better late response than never.  First, off all of my builds are fretless…"
1 hour ago
Doug Thorsvik commented on Poorness Studios's video

Wooden & Plastic Slide (Swannee) Whistles Compared

"I like the wood one better Kale! It has a richer tone. But the plastic one sounds good too; seems…"
1 hour ago
Chance commented on Chance's photo


"Rod piezo straight to jack..."
1 hour ago
Chance commented on Uncle Harry's Delta Blues's photo

roi tan box 80 yrs old

"Such an awesome build.  I have a few antique wood cigar boxes (over 100 years) and some from…"
3 hours ago
Chance posted a discussion

Sliders only.

Am I the only builder around who solely builds un-fretted, stringed instruments?  Many builders…See More
3 hours ago
Chance updated their profile
5 hours ago
Chance posted photos
5 hours ago
Uncle Harry's Delta Blues updated their profile
9 hours ago
Uncle Harry's Delta Blues joined Andy Stone's group

Cigar Box Ukulele

Does your cigar box contain a jumping flea?
9 hours ago
Uncle Harry's Delta Blues commented on Uncle Harry's Delta Blues's photo

roi tan box 80 yrs old

"I ended up restaining a tad darker and now they POP, Pics to follow."
9 hours ago



© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->