Okay so I have a cigar box ordered and on its way to me but I now seem to have stumbled at the next hurdle which is trying to find a timber merchant that I can buy pieces of american oak or maple from which to make a neck.  Strangely enough I have a timber supplier less than a mile from my home that will sell me the wood at a reasonable price but it is 6 inches wide, unbelievably the guy informed me that they don't have sawing equipment as they mainly sell to trade and they tend to saw their own as necessary.  Has anyone else had this kind of problem and if so how did you overcome it?  I do not have specialist electrical saws and have no inclination to buy one, for occasional hobby use it would be a waste of money.  Failing that if anyone in the Lincolnshire area knows of a supplier where I could purchase pre-sawn timber I would be grateful for a heads up.  I even thought of buying from the timber merchant and seeing if my local B&Q would cut it to size for me???

Thanks for any help guys.

Midge

Views: 1782

Replies to This Discussion

To saw timber, all you need is a handsaw - I made around 200 guitars before getting any serious power tools, and sawed my way thru' a lot of oak and mahogany with just an ordinary handsaw. Don't get fixated on having to have american oak, maple or whatever, almost any timber will do. Table legs from skips are a favorite source of wood from me...but a decent piece of softwood will do - I've made hundreds of them at my 'make and play' workshops just using 1" x 1 1/2" sawn softwood from Homebase.

John

Thanks for the advice, much appreciated.  I have read that the soft woods wouldn't stand up to the tension once strings were added?  But if this is not the case then I will bow to your greater knowledge.  Any timber I've ever bought from local DIY stores has been for jobs around the home and has been fairly uninspiring and I'd like my first build to look as nice as nice as possible.  I even have an old Squier guitar neck here but have not seen any how to's or other tutorials on how I could succesfully use such an item, though I know people do use them.

Thanks again 

Could you use Plywood for a neck. Not the usual softwood type but Hardwood Plywood or Marine Ply ? 

It can be bought in 1 mtr X 1 mtr X 18mm. sheets.  Two strips 1. 5 inches wide glued together could work ?

Or not ????

Just a thought.

Hi Tony, yes a good quality ply (Swedish birch has no gaps on either edge, the guys who build rocking horses use it for the varnished clear finishes and may have enough left over from a build but sadly the kit builders have nothing but sawdust left over but do look fantastic so a neck would look just as good) depending on how many strings you want to build to is a major factor. Ash is a great wood to work with and very resilient, oak is good but very heavy. The best necks I have made have been laminated and are very strong but without a truss rod it's a bit of a risk but that is just making a ply yourself really. This game is throw the dice and hope for the best, we are all ground breaking and that is what makes the Nation what it is mate, ask the guys and get the short cut through experiences of the members, happy building Tony. Chris. :)

Softwood isn't great, but it will work - I've used decent Hemlock (stair bannisters) from Wickes..straight grained and pretty dense...and if you glue on a fretboard it holds up just fine. Remember, it's a stick in a box, not a Gibson..so use a stick!

Thanks for that John, the "stick in a box" comment really brought it home.

Midge

In true CBG style go do a bit of skip diving, there's always someone chucking out good wood. Got any old relatives with garages, sheds? Ask if they have any bits of old furniture, shelving etc. Put an ad on Freecycle. Lots of ways of getting good seasoned hardwood for free. Only time I've actually bought neck wood was just cos I wanted some maple. Then as CB John said, cut it down with a handsaw. Yeah hard work but more satisfying and has a lot more mojo when you've built it.

Thanks for the input Mojo, much appreciated.

Midge

Hi Midge,

You don't say how thick the timber is. If you you are going to do this type of woodwork or come to that any woodwork, you will need a number of tools & equipment. You could see if there are any wood turning or woodwork clubs in your area, these guys I'm sure would help may be with a small donation to the club. Most of these guy have band saws which is a god send to woodworking. As Chickenbone said a hand saw will do the job & are not expensive from B&Q. I live in Surrey, so can not help other than chat about it. Again skips & damps can good for old furniture. At this time I have only one Strumstick but want to go to make more & cigar boxes. 

Woody.  

Thanks for the advice Graham, much appreciated.

Midge

Hi Midge,

Roosterman was selling neck blanks (hardwood) 5 for £50 which included postage. One end slimmed down to take the machine heads. The link with photo was on the chat part of the group from 5th jan 2013 Currently page 22. Sorry the iPad cannot cut and paste the photo. If interested message him via his page http://www.cigarboxnation.com/profile/RandyRoosterGuitars to send a full email you need to "friend"request him from the left column of his page. I bought 5 as health issues put me off trying to cut my own and I am really happy with them.

DL

Thanks for the heads up on that David, I'll make some enquiries.

Midge

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Pink Toothbrush Alternative Market & Record fair

Started by Keith 66. Last reply by Keith 66 Apr 24, 2023. 1 Reply

Small box woes?

Started by Sleepy John. Last reply by Jock MacHinery Jun 15, 2020. 12 Replies

Newby

Started by David Tarry. Last reply by David Bowes May 11, 2020. 7 Replies

FX rigs and recommendations

Started by Alex Rigby Mar 25, 2019. 0 Replies

London One Man Band festival with Hollowbelly

Started by Blind Boy Fullers. Last reply by Blind Boy Fullers Mar 20, 2019. 4 Replies

Best Amp

Started by Seasick Mick. Last reply by Seasick Mick Mar 13, 2019. 18 Replies

Looking to play some festivals next year

Started by Alex Rigby. Last reply by Alex Rigby Jan 13, 2019. 3 Replies

New Site goes live!!

Started by John Pilling. Last reply by t-belly johnson Oct 30, 2018. 14 Replies

Demise of Gibson

Started by Sleepy John. Last reply by Sleepy John May 3, 2018. 3 Replies

boxes for sale

Started by Rick D. Last reply by Tony Dec 14, 2017. 5 Replies

My latest build - hubcap resonator

Started by Alex Rigby. Last reply by Slow Blues Dani & Ol' Grey Bear Oct 10, 2017. 4 Replies

My CBG

Started by Steve. Last reply by Steve Sep 13, 2017. 2 Replies

Some of my songs

Started by Alex Rigby. Last reply by Alex Rigby Jun 7, 2017. 2 Replies

School project

Started by Keith 66. Last reply by Michael Fred Johnson Feb 5, 2017. 8 Replies

Old Timers

Started by Mal Chilvers. Last reply by David L. Oct 13, 2016. 2 Replies

Looking to get started

Started by Hubert Knight. Last reply by Hubert Knight Oct 11, 2016. 6 Replies

I Could Really Do With A Jig !

Started by Philip Hale. Last reply by Philip Hale Aug 5, 2016. 19 Replies

Help with parts please

Started by Toofy Peg. Last reply by Fomhorach Jun 14, 2016. 19 Replies

Brass Eyelets - big ones - where to get?

Started by Alex Rigby. Last reply by Fomhorach Apr 27, 2016. 16 Replies

Latest Activity

Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Unboxing a Travel Ukulele from Blue Sun Instruments (3-D printed)

"Fun video Kale! I have looked at various 3D printed ukuleles and actually printed a travel one…"
29 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Pancho and Lefty: 2-String Violin Chugger Cigar Box Guitar

"Thanks for watching Kale and Alan! This is another new song I learned courtesy of Mike (upper left…"
36 minutes ago
AGP # commented on Darryl Tuttle's photo
Thumbnail

harmony Stella

""Cool", wish I had a friend like that :-)"
1 hour ago
AGP # liked Darryl Tuttle's photo
1 hour ago
AGP # liked Kim Mosier's photo
1 hour ago
AGP # commented on Doug Thorsvik's video
Thumbnail

Pancho and Lefty: 2-String Violin Chugger Cigar Box Guitar

""Yup!" Good Song Slingers, recognised the Song Title, the but must admit I had to do a…"
1 hour ago
AGP # liked Doug Thorsvik's video
1 hour ago
AGP # liked Gary O'slide's video
1 hour ago
AGP # commented on Poorness Studios's video
Thumbnail

Older Women (cover on cigar box guitar) | Ronnie McDowell

"Never heard of that Song or Singer before Poorness, checked it out on Utube of course, and can now…"
1 hour ago
AGP # liked Poorness Studios's video
1 hour ago
T-Gripped liked A.D.EKER's photo
2 hours ago
T-Gripped liked A.D.EKER's photo
2 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->