Replies to This Discussion

Permalink Reply by Tom "Broken E String" Sobieski on June 24, 2012 at 4:05am

Interested in this my own self, hope for some answers

Permalink Reply by Joseph Young on July 3, 2012 at 4:01pm

flatpups are low pro pickups and they are made by a member of CBN u can put em between the strings and body

Permalink Reply by Seaman Jay on July 3, 2012 at 10:42pm

... and more exactly - by Elmar Zeilhofer

Permalink Reply by Wichita Sam on July 11, 2012 at 3:11pm

If you don't want to go with flatpups, you can fix the neck to the a piece of board that connect the bottom of the neck to the back of the CBG.  You are essentially building a "backbone" neck thru and you can remove way more wood to accomodate that pickup than you would with a typical neck thru.

Permalink Reply by Wichita Sam on July 11, 2012 at 4:11pm

If you don't want to go with flatpups, you can fix the neck to the a piece of board that connect the bottom of the neck to the back of the CBG.  You are essentially building a "backbone" neck thru and you can remove way more wood to accomodate that pickup than you would with a typical neck thru. 

Permalink Reply by Reeds Taylor on August 6, 2012 at 1:55pm

I drew up this diagram, I hope it helps you.