All, There has been a GREAT thread on the forum about homemade wood stains. Please repost your "recipe" here.

Views: 9534

Replies to This Discussion

I'll start off -- I have used old inkjet printer cartridges as black stain. I have taken them and drained the ink out, rubbed it on the wood. Works great but will stain the hands quickly.
ORANGE... I need a dark rusty Orange color... any ideas
as regards to the vinigar and steel mix it works superb on Oak and some other woods - on Oak it's true it turns it jet Black in minutes as long as the mix is strong enough

heres how i make mine - use 500Ml Malt vinigar and one good handfull of steel nails (clean not rusty) put them in a jar with a lid on but leave the lid slightly undone so the mixture can breath - give it a stir every days for four or five days then it's good to use the longer you leave it the better it gets

as always try it on some scrap wood before using on your build

i used this mix on both the plank guitars - on sycamore it turns it a silver grey which is a fantastic base for adding a waulnut over stain followed Danish oil - the oak necks on the Plank guitars went jet black then i rubbed it back with some 240 grit to highlight the areas that would wear by constant use

hope this helps

Wes, thanks for this group, I'll mention the Potassium Permanganate again. It is a purple crystal you can buy at the hardware and mix it with water. It produces a purple solution that turns brown when dried on wood. The more you use the darker it gets. Remember the PP is poison so wear gloves.
two words: Shoe polish, I've used it on other things (clocks and such) works great.
Guys, here is a great discussion on this in the American Association of Woodturners on using steel wool and vinegar:

Steel Wool and Vinegar

Shoe or Leather dye. Brilliant!

Eric Porter said:
two words: Shoe polish, I've used it on other things (clocks and such) works great.
Hi Steve Hardman here
I use food colouring thinned out with whatever spirit you are drinking [I used vodka].
You can get all the primary colours at a grocery store, and the vodka, do the staining then
drink what's left.
Cheers from the UK. By now.
Addendum -- I recently used the Vinegar/Steel Wool mix and had to add ink to make it blacker. Apparently the oak I was using did not have the needed amount of tannins. A test piece came out jet black, but the real piece came out a dirty asphalt color. I had to use black ink from an old ink jet printer. Worked well but DO NOT subject the stain to alcohol based solvents. This will take the black off. Test any piece for stain ability.

One other thing that I hear and tried -- soak whatever piece you want with a strong tea solution. It adds tannins which cause the blackening.

I have used Ritz clothing dye, roofing tar diluted with Goo be gone, De-Solv-it or other type tar grease, crayon removing solvent. I have used old latex house paint mixed with Ritz dye. Steel wool mixed with vinagar, this mixture works well on maple. I have also discouvered folks selling their half used old commercal stains at garage sales and swapmeets for cheap.
Try using tobacco or coffee with ammonia....Tobo is good for a light brown or honey and coffee is a good midtone brown.
I experimented with some rose buds and alcohol and got a good rosey color but I lost the sample so I dont know how good it lasts in uv light dont know if it goes brown.

I wish someone would send me some black walnut hulls....
Just tried the vinegar and steel mix as a stain on a maple-oak laminated neck.
Turned out great. The oak is turning a nice black, while the maple is a medium
brownish color. The black oak stripe really sets off the neck. Thanks for the tip.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Discussion Forum

Using & Making Templates

Started by John Sims. Last reply by BrianQ. Sep 5, 2018. 4 Replies


Started by BP - RabidSalad - Aug 15, 2015. 0 Replies

A Simple Fret Scale Ruler

Started by John Sims. Last reply by Brown Water Jerry (Rice) Jun 30, 2015. 7 Replies

fret construction

Started by Allan. Last reply by Monterey Jun 28, 2015. 8 Replies

Milk Paint & Natural Pigments

Started by Monterey Jun 28, 2015. 0 Replies

Homemade Wood Stains

Started by Wes "I'm Baaaaack" Yates. Last reply by Monterey Jun 28, 2015. 22 Replies

Custom Made Logo Decals

Started by John Sims. Last reply by Monterey Jun 28, 2015. 11 Replies

Holding down fretboards for gluing

Started by Wes "I'm Baaaaack" Yates. Last reply by Joe Caruso Apr 12, 2015. 9 Replies

Simple Fret Depth Gauge

Started by John Sims. Last reply by Joe Caruso Apr 12, 2015. 3 Replies

Easy way to glue down a fret board without it sliding

Started by John Rivers. Last reply by Steve Walker Mar 18, 2014. 1 Reply

Sharpie safe varnish for saving signatures on CBGs

Started by Wes "I'm Baaaaack" Yates. Last reply by Wes "I'm Baaaaack" Yates Jan 2, 2013. 4 Replies

Strap buttons on the cheap

Started by Wes "I'm Baaaaack" Yates. Last reply by jamie bark Aug 10, 2012. 16 Replies

Side markers on the REAL cheap!

Started by Wes "I'm Baaaaack" Yates. Last reply by Soul Cat Guitar Uke and Amp Nov 28, 2011. 10 Replies

Homemade Dot Fret Markers

Started by Jerry. Last reply by Jerry Oct 26, 2011. 5 Replies

Fretboard radius sander on the cheap

Started by Wes "I'm Baaaaack" Yates. Last reply by Wes "I'm Baaaaack" Yates Jul 14, 2011. 12 Replies

35mm metal slide storage box

Started by nick tyson. Last reply by nick tyson Jul 7, 2010. 2 Replies

questions about installing a pickup

Started by Hey, TURN IT DOWN!. Last reply by Outhouse Instruments May 30, 2010. 4 Replies

Dent removal

Started by Wes "I'm Baaaaack" Yates. Last reply by Phil Delpierre May 19, 2010. 2 Replies

Stains for wood

Started by Robert Hynden. Last reply by Robert Hynden Apr 13, 2010. 2 Replies

Blog Posts

A Tribute

Posted by Ghostbuttons on January 15, 2023 at 12:00pm 1 Comment

Let’s talk Aeolian…

Posted by BrianQ. on August 26, 2022 at 5:05pm 0 Comments


© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->