A Simple Metallic Inlay

This is about making inlays that look like silver or metal in a simple and cheap way, along with being quite fast.

What you need:
-solder (I use flux core solder, because it is very shiny. There are various diameters, so you can choose what is best for you. I use whatever is available in my electronics toolkit.)
-soldering iron
-sandpaper or file

If you are making a new fretboard, I suggest you do the inlay before you sand the board, especially if you are sanding a radius into the fretboard.

When you have your fretboard or your headstock, or whatever else you need to inlay, routed in the shape that you desire your inlay to look like, take the solder and cut it into little pieces. Then with your soldering iron melt it into the routed out portion of the wood using the tip of the iron. A 25 to 50 watt soldering iron is sufficient. You don't want to burn the wood, unless of course you want 'that look'.

You can also choose not to cut the solder into little pieces and use it as it is. The heat of the soldering iron will not damage the wood if used properly. Experiment first! Use more solder than you think. You want to make the top surface of the melted solder rise slightly above the surface of the board without spinning over the edges of the routed portion. If it does spill over, no problem. Sand it off later.

When you have finished all the inlaying work, you will notice that the inlay is not flush with the fretboard surface and there are some oils that are escaped from the wood, so you will need to sand it to make it flush with the board and to remove the oils. I suggest to use fine grits of sandpaper or a very fine file. Once the inlay is flush with the fretboard, you can polish it (mask the wood before you use the polish) to make it shiny.

This technique is also good to make side dots. I suggest you try it first on a piece of scrap wood, and to begin with small dots as first works. This is really a simple technique, but the results are simply great!


By Paolo Schiano
edited by Dragon

Views: 634

Replies to This Discussion

Hot damn! I gotta try this. Thanks for posting it John.
Let us see yer first tryout CB!

C. B. Gitty said:
Hot damn! I gotta try this. Thanks for posting it John.
Hey John
I just went and tried this on a piece of scrap.At first I thought the solder wouldn't stick to the wood. After I filled the hole up.Wow! success.It looks Great. Hey it sands off easy too. Thanks! Lenny
I tried this , but it burned the wood pretty badly, maybe my soldering iron was too hot? Be sure to experiment with scrap wood first!
Definitely you made the wood too hot!

Deke said:
I tried this , but it burned the wood pretty badly, maybe my soldering iron was too hot? Be sure to experiment with scrap wood first!
I practice on 5 gal paint stirring sticks. They are free at HD or L's and easy to carve.
Thanks for this!! I tried it on a mandolin I just finished. Beautiful.

What a great idea John!!
Thats a great idea, I will give it a try. Thanks!!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Dent removal

Started by Wes "I'm Baaaaack" Yates. Last reply by Slow Mick Dec 21, 2023. 3 Replies

Using & Making Templates

Started by John Sims. Last reply by BrianQ. Sep 5, 2018. 4 Replies

Punches

Started by BP - RabidSalad - Aug 15, 2015. 0 Replies

A Simple Fret Scale Ruler

Started by John Sims. Last reply by Brown Water Jerry (Rice) Jun 30, 2015. 7 Replies

fret construction

Started by Allan. Last reply by Monterey Jun 28, 2015. 8 Replies

Milk Paint & Natural Pigments

Started by Monterey Jun 28, 2015. 0 Replies

Homemade Wood Stains

Started by Wes "I'm Baaaaack" Yates. Last reply by Monterey Jun 28, 2015. 22 Replies

Custom Made Logo Decals

Started by John Sims. Last reply by Monterey Jun 28, 2015. 11 Replies

Holding down fretboards for gluing

Started by Wes "I'm Baaaaack" Yates. Last reply by Joe Caruso Apr 12, 2015. 9 Replies

Simple Fret Depth Gauge

Started by John Sims. Last reply by Joe Caruso Apr 12, 2015. 3 Replies

Easy way to glue down a fret board without it sliding

Started by John Rivers. Last reply by Steve Walker Mar 18, 2014. 1 Reply

Sharpie safe varnish for saving signatures on CBGs

Started by Wes "I'm Baaaaack" Yates. Last reply by Wes "I'm Baaaaack" Yates Jan 2, 2013. 4 Replies

Strap buttons on the cheap

Started by Wes "I'm Baaaaack" Yates. Last reply by jamie bark Aug 10, 2012. 16 Replies

Side markers on the REAL cheap!

Started by Wes "I'm Baaaaack" Yates. Last reply by Soul Cat Guitar Uke and Amp Nov 28, 2011. 10 Replies

Homemade Dot Fret Markers

Started by Jerry. Last reply by Jerry Oct 26, 2011. 5 Replies

Fretboard radius sander on the cheap

Started by Wes "I'm Baaaaack" Yates. Last reply by Wes "I'm Baaaaack" Yates Jul 14, 2011. 12 Replies

35mm metal slide storage box

Started by nick tyson. Last reply by nick tyson Jul 7, 2010. 2 Replies

questions about installing a pickup

Started by Hey, TURN IT DOWN!. Last reply by Outhouse Instruments May 30, 2010. 4 Replies

Stains for wood

Started by Robert Hynden. Last reply by Robert Hynden Apr 13, 2010. 2 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
6 hours ago
BrianQ. commented on Dar Stellabotta's video
10 hours ago
BrianQ. liked Dar Stellabotta's video
10 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
13 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
14 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
14 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
16 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
17 hours ago
A.D.EKER commented on Ricky D's photo
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->